BS PD CEN/TR 16798-4:2017参考EN 16798-3。它包含支持正确理解和使用EN 16798-3的信息。本技术报告不包含任何规范性规定。本技术报告适用于通风、空调和通风系统的设计和实施 非住宅建筑的房间空调系统，但不包括 工业过程等应用。它着重于各种参数的定义，这些参数是 与此类系统相关。本标准及其附件中给出的设计指南主要适用于机械设备 供气和排气通风系统，以及混合通风系统的机械部分。 此外，附录D介绍了自然通风系统的一般设计原则。本技术报告不涉及住宅通风的应用。表现 CEN/TR 14788规定了住宅建筑的通风系统。分类使用不同的类别。对于某些值，给出了示例，对于要求， 给出了具有默认值的典型范围。本标准中给出的默认值不适用 因此，应在没有规定其他值的情况下使用。分类应始终 适用于建筑类型及其预期用途，分类依据应为: 如果不使用标准中给出的示例，则说明。 注:不同的标准可能会以不同的方式表示相同参数的类别 类别符号可能不同。交叉引用:EN 16798-3:2017CEN ISO/TR 52798-3:2017CENISO/TR 52000-2EN 308:1997ISO/ISO/TR 52000-2:2017EN 15287-1:2007EN 15287-1:2007EN 1886:2007EN 15287-2:2008EN 13053:2006prEN 16798-1 EN 16798-1 EN 15459:2007ISO 16814:2008 Ed 1EN 16798-16798-16798-5-5-1:2017EN 16798-17:2017EN 16798-17:12599:2012EN 15780:2011ISO 13791:2012ISO 16791:2012ISO 16890-1:2017EN 12464-1:2011ISO 9972:2015ISO 7726:1998CEN/TS 16628:2014EN ISO 7726（ISO 7726:1998 AS）CEN/TS 16629:2014CEN/TR14788:2006EN 15232:2012EN 13030:2001EN 15727:2010EN 13180:2001EN 16798-5-2:2017EN 12237:2003EN 1505:199799/30/ECFprEN ISO 52000-1EN ISO 16890EN 15240:2007EN 16798-7:2017CEN CR 1752: 1998EN 15239:2007EN 15243:2007EN ISO 13791（ISO 13791:2012）ASEN 1506:2007EN 1507:2006EN 1751:2014EN 12097:2006EN 13141-5:2004EN ISO 9972（ISO 9972:2015）ASCEN/TR 16798-18:2017购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS PD CEN/TR 16798-4:2017 refers to EN 16798-3.It contains information to support the correct understanding and use of EN 16798-3.This Technical Report does not contain any normative provision.This Technical Report applies to the design and implementation of ventilation, air conditioning and room conditioning systems for non-residential buildings subject to human occupancy, excluding applications like industrial processes. It focuses on the definitions of the various parameters, which are relevant for such systems.The guidance for design given in this standard and its annexes are mainly applicable to mechanical supply and exhaust ventilation systems, and the mechanical part of hybrid ventilation systems.Furthermore general design principles of natural ventilation systems are introduced in Annex D.Applications for residential ventilation are not dealt with in this technical report. Performance of ventilation systems in residential buildings are dealt with in CEN/TR 14788.The classification uses different categories. For some values, examples are given and, for requirements, typical ranges with default values are presented. The default values given in this standard are not normative as such, and should be used where no other values are specified. Classification should always be appropriate to the type of building and its intended use, and the basis of the classification should be explained if the examples given in the standard are not to be used.NOTE Different standards might express the categories for the same parameters in a different way, and the category symbols may be different.Cross References:EN 16798-3:2017CENISO/TR 52000-2EN 308:1997ISO/TR 52000-2:2017EN 15287-1:2007EN 1886:2007EN 15287-2:2008EN 13053:2006prEN 16798-1 EN 15459:2007ISO 16814:2008 Ed 1EN 16798-5-1:2017EN 16798-17:2017EN 12599:2012EN 15780:2011ISO 13791:2012ISO 16890-1:2016EN 15193:2007EN 12464-1:2011ISO 9972:2015ISO 7726:1998CEN/TS 16628:2014EN ISO 7726 (ISO 7726:1998 AS)CEN/TS 16629:2014CEN/TR 14788:2006EN 15232:2012EN 13030:2001EN 15727:2010EN 13180:2001EN 16798-5-2:2017EN 12237:2003EN 1505:199799/30/ECFprEN ISO 52000-1EN ISO 16890EN 15240:2007EN 16798-7:2017CEN CR 1752:1998EN 15239:2007EN 15243:2007EN ISO 13791 (ISO 13791:2012) ASEN 1506:2007EN 1507:2006EN 1751:2014EN 12097:2006EN 13141-5:2004EN ISO 9972 (ISO 9972:2015) ASCEN/TR 16798-18:2017All current amendments available at time of purchase are included with the purchase of this document.