本欧洲标准规定了表1中规定的由热机械轧制钢制成的压力设备的扁平产品的要求。 钢不适合热成型。 注1:在本欧洲标准发布时，没有足够的数据可用于标准化这些钢的高温性能。 如果他们在这样的温度下使用，这个条件应该是有利害关系方之间特别商定的。 EN 10028 1:2017的要求也适用。 注2:根据“2014/68/EU指令”，在欧盟官方公报（OJEU）发布此欧洲标准之后，符合2014/68/EU指令的基本安全要求（ESR）的推定仅限于材料的技术数据本欧洲标准（第1部分和系列的其他相关部分），并且不将材料的适当性推定到特定设备项目。因此，需要对本材料标准中规定的技术数据对本设备的设计要求进行评估，以验证2014/68/EU指令的ESR是否得到满足。

This European Standard specifies the requirements for flat products for pressure equipment made of thermomechanically rolled steels as specified in Table 1. The steels are not suitable for hot forming. NOTE 1 At the time of publication of this European Standard, no sufficient data for the standardization of the elevated temperature properties of these steels was available. If their use at such temperatures is intended the conditions for this should be specially agreed between the interested parties. The requirements of EN 10028 1:2017 also apply. NOTE 2 Once this European Standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this European Standard (Part 1 and the other relevant part of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done.