Specification for nickel-chromium-molybdenum steel castings (1150-1300 MPa)
镍铬钼钢铸件规范（1150-1300 MPa）

1974-05-10

Specification for chromium-molybdenum steel sheet and strip (1150/1300 Mpa) (suitable for welding)
铬钼钢薄板和带材（1150/1300 Mpa）（适用于焊接）规范

2003-05-27

Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm)
铬钼钢管规范（1150 MPa）（最大厚度8 mm）

1980-02-29

1 % Chromium-molybdenum steel billets, bars, forgings and parts. (1150 to 1300 MPa: Limiting ruling section 16 mm) (Suitable for welding)
1%铬钼钢坯料、棒材、锻件和零件 （1150至1300兆帕:极限截面16毫米）（适用于焊接）

2002-10-30

Specification for Nickel-chromium-molybdenum steel castings (880–1080 MPa)
镍铬钼钢铸件规范（880？1080 MPa）

2012-12-31

Specification for 18 % chromium-11 % nickel-2.5 % molybdenum niobium-stabilized corrosion-resisting steel castings (500 MPa)
18%铬-11%镍-2.5%钼铌稳定耐蚀钢铸件规范（500MPa）

2013-01-31

Specification for 12% chromium-nickel-molybdenum-vanadium heat-resisting steel bars for the manufacture of fasteners (1100-1300 MPa: limiting ruling section 50 mm)
紧固件制造用12%铬镍钼钒耐热钢筋规范

1981-12-31

Specification for 3% chromium-molybdenum steel castings (620-770 N/mm²)
3%铬钼钢铸件规范（620-770 N/mm^2）

1973-03-09

Specification. 3% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1180-1380 MPa)
规格3%镍铬钼表面硬化钢坯、棒材、锻件和零件（1180-1380 MPa）

1976-04-30

Specification for 3% chromium-molybdenum nitriding steel castings (850-1000 N/mm²)
3%铬钼氮化钢铸件规范（850-1000 N/mm^2）

1973-03-09

Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (950 MPa) (Cr 14.0, Ni 4.5, Cu 2.5, Mo 1.5)-Specification for precipitation hardening chromium-nickel-copper- molybdenum steel castings (950 MPa) (Cr 14.0, Ni 4.5, Cu 2.5, Mo 1.5)
沉淀硬化铬镍铜钼钢铸件规范（950 MPa）（Cr 14.0 Ni 4.5 Cu 2.5 Mo 1.5） 沉淀硬化铬镍铜钼钢铸件（950MPa）规范（Cr14.0 Ni4.5 Cu2.5 Mo1.5）

2013-04-30

Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (1250 MPa) (Cr 14.0, Ni 4.5, Cu 2.5, Mo 1.5)
沉淀硬化铬镍铜钼钢铸件规范（1250MPa）（Cr 14.0 Ni 4.5 Cu 2.5 Mo 1.5）

2013-05-31

Specification. 3% chromium-molybdenum steel billets, bars, forgings and parts (930-1080 MPa: limiting ruling section 150 mm) (suitable for nitriding)
规格3%铬钼钢坯料、棒材、锻件和零件（930-1080 MPa:限制截面150 mm）（适用于渗氮）

2002-10-08

Specification. 3% chromium-molybdenum-vanadium steel billets, bars, forgings and parts (1320-1470 MPa: limiting ruling section 70 mm) (suitable for nitriding)
规格3%铬钼钒钢坯料、棒材、锻件和零件（1320-1470 MPa:限制截面70 mm）（适用于渗氮）

2003-05-30

Specification for precipitaton hardening chromium-nickel-copper corrosion-resisting steel castings (1250-1500 MPa) (Cr 16, Ni 4, Cu 3)
沉淀硬化铬镍铜耐蚀钢铸件规范（1250-1500 MPa）（Cr 16 Ni 4 Cu 3）

1974-11-29