现行

DIN EN 12373-9

Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus
铝和铝合金.阳极氧化.第9部分:用砂轮磨损试验装置测量阳极氧化涂层的耐磨性和磨损指数；德文版EN 12373-9:1998

1999-02-01

现行

UNE-EN 12373-5-1999

ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 5: ASSESSMENT OF QUALITY OF SEALED ANODIC OXIDATION COATINGS BY MEASUREMENT OF ADMITTANCE.
铝和铝合金 阳极氧化 第5部分:通过导纳测量评估密封阳极氧化涂层的质量

1999-06-30

现行

DIN EN 12373-5

Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
铝和铝合金.阳极氧化.第5部分:通过导纳测量评估密封阳极氧化涂层的质量

1999-02-01

现行

KS D 8314-1(2021 Confirm)

알루미늄 및 알루미늄 합금의 양극 산화 피막의 내마모성 시험방법－제1부：왕복 운동 평면 마모 시험
铝及铝合金阳极氧化膜耐磨性试验方法第1部分:车轮磨损试验

2011-07-22

现行

KS D 8314-1(2016 Confirm)

알루미늄 및 알루미늄 합금의 양극 산화 피막의 내마모성 시험방법－제1부：왕복 운동 평면 마모 시험
铝及铝合金阳极氧化膜耐磨性试验方法第1部分:车轮磨损试验

2011-07-22

现行

UNE-EN 12373-13-2001

Aluminium and aluminium alloys. Anodizing. Part 13: Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer.
铝和铝合金 阳极氧化 第13部分:用测角仪或简略测角仪测量铝表面的反射特性

2001-02-20

现行

UNE-EN 12373-12-2001

Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments.
铝和铝合金.阳极氧化.第12部分:用积分球仪器测量铝表面的反射特性

2001-02-28

现行

JIS H 8682-1-2013

Anodizing of aluminium and its alloys -- Measurement of abrasion resistance of anodic oxidation coatings -- Part 1: Abrasive-wheel-wear abrasion resistance test
铝及铝合金阳极氧化阳极氧化膜耐磨性的测定第1部分:砂轮耐磨性试验

2013-01-01

现行

DIN EN 12373-3

Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
铝和铝合金.阳极氧化.第3部分:阳极氧化涂层厚度的测定；分束显微镜无损检测；德文版EN 12373-3:1998

1999-04-01

现行

UNE-EN 12373-3-1999

ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 3: DETERMINATION OF THICKNESS OF ANODIC OXIDATION COATINGS -NON-DESTRUCTIVE MEASUREMENT BY SPLIT-BEAM MICROSCOPE.
铝和铝合金 阳极氧化 第3部分:阳极氧化膜厚度的测定.分光显微镜无损测量

1999-05-31

现行

GB/T 8014.1-2005

铝及铝合金阳极氧化 氧化膜厚度的测量方法 第1部分:测量原则
Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 1:The measuring principle

2005-07-04

现行

DIN EN 12373-10

Aluminium and aluminium alloy - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus
铝和铝合金.阳极氧化.第10部分:用磨料喷射试验装置测量阳极氧化涂层的平均比耐磨性；德文版EN 12373-10:1998

1999-03-01

现行

UNE-EN 12373-11-2001

ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 11: MEASUREMENT OF SPECULAR REFLECTANCE AND SPECULAR GLOSS OF ANODIC OXIDATION COATINGS AT ANGLES OF 20º, 45º, 60º OR 85º.
铝和铝合金 阳极氧化 第11部分:阳极氧化涂层在20º、45º、60º或85º角度下的镜面反射率和镜面光泽的测量

2001-02-28

现行

UNE-EN 12373-10-2000

ALUMINIUM AND ALUMINIUM ALLOYS. ANODIZING. PART 10: MEASUREMENT OF MEAN SPECIFIC ABRASION RESISTANCE OF ANODIC OXIDATION COATINGS USING AN ABRASIVE JET TEST APPARATUS.
铝和铝合金 阳极氧化 第10部分:使用磨料喷射试验装置测量阳极氧化涂层的平均比耐磨性

2000-01-21

现行

JIS H 8683-3-2013

Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings -- Part 3: Measurement of admittance
铝及铝合金阳极氧化密封阳极氧化膜质量的评定第3部分:导纳的测量

2013-01-01

现行

GB/T 12967.1-2020

铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第1部分：耐磨性的测定
Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys―Part 1: Measurement of abrasion resistance

2020-06-02

现行

DIN EN 12373-12

Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments; English version of DIN EN 12373-12
铝和铝合金.阳极氧化.第12部分:用积分球仪器测量铝表面的反射特性；DIN EN 12373-12的英文版

2000-12-01

现行

DIN EN 12373-13

Aluminium and aluminium alloys - Anodizing - Part 13: Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer; English version of DIN EN 12373-13
铝和铝合金.阳极氧化.第13部分:用测角计或简略测角计测量铝表面的反射特性；德文版EN 12373-13:2000

2000-12-01

现行

GB/T 8014.3-2005

铝及铝合金阳极氧化 氧化膜厚度的测量方法 第3部分:分光束显微镜法
Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 3:Split-beam microscope method

2005-07-04

现行

JIS H 8680-3-2013

Anodizing of aluminium and its alloys -- Determination of thickness of anodic oxidation coatings -- Part 3: Non-destructive measurement by split-beam microscope
铝及铝合金阳极氧化阳极氧化膜厚度的测定第3部分:分光显微镜无损测量

2013-01-01