电动汽车传导充电用连接装置 第3部分：直流充电接口
Connection set for conductive charging of electric vehicles—Part 3: DC charging coupler

2023-09-07

电动汽车传导充电用连接装置 第2部分：交流充电接口
Connection set for conductive charging of electric vehicles—Part 2: AC charging coupler

2015-12-28

电动汽车传导充电用连接装置 第4部分：大功率直流充电接口
Connection set of conductive charging for electric vehicles—Part 4：High power DC charging coupler

2023-09-07

电动汽车充电接口规范 第3部分:直流充电接口

Electric vehicle conductive charging system, Part 23: D.C electric vehicle charging station
电动汽车传导充电系统.第2-3部分:电动汽车直流充电站

2014-06-30

电动汽车传导充电用连接装置 第1部分：通用要求
Connection set for conductive charging of electric vehicles—Part 1: General requirements

2023-09-07

Electric vehicle conductive charging system -- Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply.
电动汽车传导充电系统第21部分:电动汽车交流/直流电源传导连接要求

2002-12-20

전기자동차 전도성 충전시스템 — 제21-2부: 교류/직류 전원에 전도성 접속을 위한 전기자동차 요구사항 — 비탑재형 전기자동차 충전시스템 EMC 요구사항
电动汽车传导充电系统第21-2部分:电动汽车对交流/直流电源传导连接的要求非车载电动汽车充电系统的电磁兼容性要求

2019-12-27

전기자동차 전도성 충전시스템 — 제21-1부: 교류/직류 전원에 전도성 접속을 위한 전기자동차 탑재형 충전기 EMC 요구사항
电动汽车传导充电系统第21-1部分:电动汽车车载充电器与交流/直流电源传导连接的电磁兼容性要求

2019-12-27

Draft Document - Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply (IEC 69/185/CD:2010)
文件草案.电动汽车传导充电系统.第21部分:电动汽车交流/直流电源传导连接的要求（IEC 69/185/CD:2010）

2011-05-01

Draft Document - Electric vehicle conductive charging system - Part 23-1: DC Charging with an automatic connection system (IEC 69/495/CD:2017)
文件草案.电动汽车传导充电系统.第23-1部分:带自动连接系统的直流充电（IEC 69/495/CD:2017）

2017-08-01

Система зарядки электрических транспортных средств проводная. Часть 21-2. Требования для проводного соединения с источником питания переменного или постоянного тока. Требования электромагнитной совместимости для внешних зарядных систем
电动汽车传导充电系统 第21-2部分 交流/直流电源的导电连接要求 非车载充电系统的EMC要求

Plugs,socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system
插头、插座、车辆连接器和车辆插孔.电动汽车的传导充电.第3-1部分:与热管理系统一起使用的直流充电用车辆连接器、车辆插孔和电缆组件

2020-03-26

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where protection relies on electrical separation
插头、插座、车辆连接器和车辆插孔.电动汽车的传导充电.第6部分:用于直流电动汽车供电设备的直流插脚和接触管车辆耦合器的尺寸兼容性要求 其中保护依赖于电气隔离

2022-04-22

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where protection relies on electrical separation
插头、插座、车辆连接器和车辆插孔.电动汽车的传导充电.第6部分:用于直流电动汽车供电设备的直流插脚和接触管车辆耦合器的尺寸兼容性要求 其中保护依赖于电气隔离

2022-06-03

Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for DC and AC/DC pin and contact-tube vehicles couplers (IEC 23H/390A/CD:2017); Text in German and English
文件草案——插头、插座、车辆连接器和车辆插孔——电动汽车的传导充电——第3部分:直流和交流/直流针式和接触管式车辆耦合器的尺寸兼容性和互换性要求（IEC 23H/390A/CD:2017）；德语和英语文本

2018-06-01