1.1 这些试验方法提供了两种测定固体垃圾衍生燃料（RDF）制备分析样品中总硫的替代程序。硫包括在RDF的最终分析中。 1.2 试验方法按以下顺序出现: 测验 小节 Eschka方法 8 – 11 炸弹清洗方法 12和 13 1.3 这些试验方法可适用于任何可以制备实验室分析样品的废料。 1.4 以国际单位制表示的数值应视为标准值。提供英寸-磅单位以供参考。 1.5 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 有关具体的预防说明，请参阅第节 6. . 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 5.1 RDF的生产商和用户使用这些程序来确定燃料的总硫含量。

1.1 These test methods present two alternative procedures for the determination of total sulfur in prepared analysis samples of solid refuse-derived fuel (RDF). Sulfur is included in the ultimate analysis of RDF. 1.2 The test methods appear in the following order: Test Sections Eschka Method 8 – 11 Bomb Washing Method 12 and 13 1.3 These test methods may be applicable to any waste material from which a laboratory analysis sample can be prepared. 1.4 The values stated in SI units are to be regarded as standard. Inch-pound units are provided for information. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements see Section 6 . 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 These procedures are used by producers and users of RDF for determining the total sulfur content of the fuel.