IEC TS 62966-3:20 21定义了IT机柜过道安全壳的操作和人身安全要求。 目的是使用“可用性”和“安全性”标准为安装在安全壳中的IT设备提供物理安全。 这些要求适用于所有操作、工作和维护程序。 本文件不适用于普通人在使用装置和设备时。 本文描述的要求还旨在确保授权人员可以进入并留在安全壳中(作为可接近的设备)，并且可以无风险地维护或升级安装在安全壳中的系统。还应该能够在任何时候快速和安全地撤离安全壳，特别是在发生火灾或任何其他危险情况时，同时将人员的健康风险降低到最低限度。与计算、数据处理、数据存储、建筑保护或数据中心本身相关的方面不属于本文件的范围。仅考虑由通道安全壳的集成引起的那些附加方面。 集成在数据中心的过道安全壳的设计和定位对操作安全的以下不同方面有影响: a)逃生和疏散计划； (b)逃生路线； c)紧急出口； d)逃生门的功能方面； e)照明条件 f)逃生路线的照明和路标； (g)防火。 在本文件中，考虑了这些操作安全要求和建议。 为了实现最高的效率，在过道安全壳的设计过程中尽可能考虑所有这些要求。 本文件适用于正常操作，不适用于安全壳的初始安装。

IEC TS 62966-3:2021 defines the requirements for operational and personal safety of aisle containments for IT cabinets.
The aim is to provide physical security for the IT equipment installed in the containment using the criteria “availability” and “safety”.
The requirements apply to all operational, working and maintenance procedures.
This document does not apply to ordinary persons, when using installations and equipment.
The requirements described herein are also intended to ensure that it is possible for authorized personnel to enter and remain in the containment (as accessible equipment) and to maintain or upgrade the systems installed in the containment without risk. It should also be possible to evacuate the containment quickly and safely at any time, especially in the event of a fire or any other hazardous situation, whilst reducing the health risk to personnel to a minimum.
Aspects relating to computing, data processing, data storage, building protection or the data centre itself do not fall within the scope of this document. Only those additional aspects arising from the integration of an aisle containment are considered.
The design and positioning of an aisle containment, which is integrated in the data centre, has influence on the following different aspects of operational safety:
a) escape and evacuation plans;
b) escape routes;
c) emergency exits;
d) functional aspects of escape doors;
e) lighting conditions
f) lighting and signposting of escape routes;
g) fire protection.
In this document, these operational safety requirements and recommendations are considered.
To achieve the highest effectiveness, all these requirements are considered as much as possible during the design of an aisle containment.
This document applies to normal operations, not to the initial installation of the containment.