KS M 3370-2020-基于不饱和聚酯（UP）树脂压力和无压力管道系统的供水用玻璃钢（GRP）塑料管道系统-国家数字标准馆

现行 KS M 3370-2020

到馆提醒

收藏跟踪

购买正版

수도용 플라스틱 배관 시스템 —불포화 폴리에스테르 수지 유리섬유 강화 플라스틱(GRP) — 압력 및 비압력 배관 基于不饱和聚酯（UP）树脂压力和无压力管道系统的供水用玻璃钢（GRP）塑料管道系统

发布日期： 2020-12-30

该标准对以输送供饮用水等的净水及处理前原水在内的人类消费用水为目的的自来水用压力及非压力管道用，以不饱和聚酯树脂为基料制备的玻璃纤维增强热固性塑料（GRP）管道系统的性能进行了规定。

이 표준은 음용수 등을 공급하는 정수 및 처리 전 원수를 포함한 인간 소비용 물의 이송을 목적으로 하는 수도용 압력 및 비압력 배관용으로 적용하기 위해 불포화 폴리에스테르 수지를 기재로 하여 제조한 유리섬유 강화 열경화성 플라스틱(GRP) 배관 시스템의 성능에 대하여 규정한다.

分类信息

发布单位或类别：韩国-韩国标准

关联关系

研制信息

相似标准/计划/法规

UNE-EN 1796-2006+A1-2009

Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
有或无压力供水用塑料管道系统.基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）

BS EN ISO 23856-2021

Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
压力和非压力供水、排水或排污用塑料管道系统基于不饱和聚酯（UP）树脂的玻璃纤维增强热固性塑料（GRP）系统

Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
压力和非压力供水、排水或排水用塑料管道系统.基于不饱和聚酯（UP）树脂的玻璃增强热固性塑料（GRP）系统

DIN SPEC 19674-2

Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 2: Pipes
供水、排水和污水加压用玻璃纤维增强聚乙烯（PE-GF）塑料管道系统第2部分:管道

BS PD CEN/TS 14578-2013

Plastics piping systems for water supply or drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Recommended practice for installation
供水、排水和排污用塑料管道系统基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）安装推荐规程

UNE-CEN/TS 14578-2005 EX

Plastics piping systems for water supply or drainage and sewerage. Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP). Recommended practice for installation.
供水、排水和排污用塑料管道系统基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GPR）安装的推荐做法

DIN SPEC 19674-1

Plastics piping systems made from glass fibre reinforced polyethylene (PE-GF) for water supply and for drainage and sewerage under pressure - Part 1: General
供水、排水和污水加压用玻璃纤维增强聚乙烯（PE-GF）塑料管道系统第1部分:总则

BS ISO 25780-2011

Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin. Pipes with flexible joints intended to be installed using jacking techniques
压力和非压力供水、灌溉、排水或排污用塑料管道系统基于不饱和聚酯（UP）树脂的玻璃纤维增强热固性塑料（GRP）系统拟采用顶升技术安装的带有柔性接头的管道

Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques
压力和非压力供水、灌溉、排水或污水用塑料管道系统——基于不饱和聚酯（UP）树脂的玻璃纤维增强热固性塑料（GRP）系统——拟采用顶升技术安装的带挠性接头的管道

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统