请注意:此版本的所有临时修订版将在您购买时提供。UL非整体船用燃料箱安全标准，UL 1102范围这些要求包括根据美国海岸警卫队汽油燃料系统安全标准、联邦法规、第1章第33篇第183部分第J-1990子部分和非整体柴油燃料箱设计和建造的非整体通风汽油燃料箱。根据美国海岸警卫队的适用安装要求，这些要求涵盖的燃油箱用于固定安装，并提供甲板填料，以及用于永久安装；游乐和商用机动船消防标准的适用要求。 6） ，NFPA 302-1994；和/或美国船舶和游艇委员会的要求。这些要求不包括便携式船用燃油箱或与任何船舶结构集成的油箱。与本标准中涉及的电气冲击、材料或部件的要求不同，应使用适当的附加组件和最终产品要求对人员受伤进行评估，以维持本标准最初预期的可接受安全水平。如果产品的特征、特性、组件、材料或系统与本标准的特定要求或规定相冲突，则无法判断其是否符合本标准。 在认为合适的情况下，应根据本标准制定、修订和实施所采用的方法，提出并采用要求修订。

Please note: All interim revisions for this edition available at time of your purchase will be included.UL Standard for Safety for Nonintegral Marine Fuel Tanks,UL 1102ScopeThese requirements cover nonintegral, vented gasoline fuel tanks designed and constructed in accordance with theUnited States Coast Guard Safety Standard for Gasoline Fuel Systems, Code of Federal Regulations, Title 33, Chapter 1, Part 183, Subpart J-1990 and nonintegral diesel fuel tanks.The fuel tanks covered by these requirements are intended for fixed installation with deck fill provision and for permanent installation in accordance with the applicable installation requirements of U.S. Coast Guard; the applicable requirements of the Fire Protection Standard for Pleasure and Commercial Motor Craft (National Fire Codes, vol. 6), NFPA 302-1994; and/or the requirements of the American Boat & Yacht Council, Inc.These requirements do not cover portable marine fuel tanks or tanks integral with any boat structure.A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard cannot be judged to comply with this standard. Where considered appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.