本标准定义了JEDEC对固态驱动器的要求。对于每种规定的固态驱动器，本标准规定了使用条件和相应的耐久性验证要求。尽管耐久性应根据该等级的标准使用条件进行评定，但该标准还规定了制造商和买方之间商定的可能附加使用条件的要求。固态驱动器的鉴定涉及许多超出耐久性和保持性的因素，因此此类鉴定不在本标准的范围内，但本标准足以满足驱动器鉴定的耐久性和保持性部分。本标准适用于单个产品，也适用于本标准中定义的认证系列。 本标准的范围包括基于固态非易失性存储器（NVM）的固态驱动器。在撰写本文时，NAND闪存是固态驱动器中使用的最常见的存储器形式，本标准强调了NAND的某些特性。本标准还适用于其他形式的NVM。

This standard defines JEDEC requirements for solid state drives. For each defined class of solid state drive, the standard defines the conditions of use and the corresponding endurance verification requirements. Although endurance is to be rated based upon the standard conditions of use for the class, the standard also sets out requirements for possible additional use conditions as agreed to between manufacturer and purchaser.Qualification of a solid state drive involves many factors beyond endurance and retention, so such qualification is beyond the scope of this standard, but this standard is sufficient for the endurance and retention part of a drive qualification. This standard applies to individual products and also to qualification families as defined in this standard.The scope of this standard includes solid state drives based on solid-state non-volatile memory (NVM). NAND Flash memory is the most common form on memory used in solid state drives at the time of this writing, and this standard emphasizes certain features of NAND. The standard is also intended to apply to other forms of NVM.