首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ISO 12680-1:2005
到馆阅读
收藏跟踪
购买正版
Methods of test for refractory products — Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration 耐火制品试验方法第1部分:动态杨氏硬度的测定;振动脉冲激励下的s模量(MOE)
发布日期: 2005-06-20
ISO 12680-1:2005规定了通过振动脉冲激励测定耐火材料矩形截面杆和圆形截面试样动态杨氏模量的方法。动态杨氏模量由试样在弯曲振动模式下的共振频率确定。
ISO 12680-1:2005 specifies a method for determining the dynamic Young's modulus of rectangular cross-section bars and circular cross-section specimens of refractories by impulse excitation of vibration. The dynamic Young's modulus is determined using the resonant frequency of the specimen in its flexural mode of vibration.
分类信息
关联关系
研制信息
归口单位: ISO/TC 33
相似标准/计划/法规
现行
UNE-EN 993-8-1998
METHODS OF TESTING DENSE SHAPED REFRACTORY PRODUCTS. PART 8: DETERMINATION OF REFRACTORINESS-UNDER-LOAD.
致密成型耐火制品的试验方法 第8部分:负荷下耐火度的测定
1998-12-09
现行
DIN EN 993-12
Methods of test for dense shaped refractory products - Part 12: Determination of pyrometric cone equivalent (refractoriness)
致密成型耐火制品的试验方法.第12部分:高温锥体当量(耐火度)的测定;德语版本EN 993-12:1997
1997-06-01
现行
JIS R 2207-1-2007
Test methods for thermal expansion of refractory products -- Part 1: Non-contact method
耐火制品热膨胀试验方法第1部分:非接触法
2007-01-01
现行
UNE-EN 993-1-1996
METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 1: DETERMINATION OF BULK DENSITY, APPARENT POROSITY AND TRUE POSORITY.
致密成型耐火制品的试验方法 第1部分:体积密度、表观孔隙率和真实孔隙度的测定
1996-04-23
现行
UNE-EN 993-2-1996
METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 2: DETERMINATION OF TRUE DENSITY.
致密成型耐火制品的试验方法 第2部分:真密度的测定
1996-04-23
现行
DIN EN 993-9
Methods of testing dense shaped refractory products - Part 9: Determination of creep in compression
致密成型耐火制品的试验方法.第9部分:压缩蠕变的测定;德文版EN 993-9:1997
1997-07-01
现行
UNE-EN 993-9-1998
METHODS OF TESTING DENSE SHAPED REFRACTORY PRODUCTS. PART 9: DETERMINATION OF CREEP IN COMPRESSION.
致密成型耐火制品的试验方法 第9部分:压缩蠕变的测定
1998-12-09
现行
UNE-EN 993-4-1996
METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 4: DETERMINATION OF PERMEABILITY TO GASES.
致密成型耐火制品的试验方法 第4部分:气体渗透性的测定
1996-04-23
现行
DIN EN 1094-1
Insulating refractory products - Part 1: Terminology, classification and methods of test for high temperature insulation wool products
隔热耐火制品.第1部分:高温隔热羊毛制品的术语、分类和试验方法;德文版EN 1094-1:2008
2008-09-01
现行
UNE-EN ISO 12680-1-2007
Methods of test for refractory products - Part 1: Determination of dynamic Youngs modulus (MOE) by impulse excitation of vibration (ISO 12680-1:2005)
耐火制品的试验方法.第1部分:通过振动脉冲激励测定动态杨氏模量(MOE)(ISO 12680-1-2005)
2007-09-12
现行
DIN EN ISO 12680-1
Methods of test for refractory products - Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration (ISO 12680-1:2005)
耐火制品的试验方法.第1部分:用振动脉冲激励法测定动态杨氏模量(MOE)(ISO 12680-1-2005);德文版EN ISO 12680-1:2007
2007-05-01
现行
DIN EN 993-19
Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method
致密成型耐火制品的试验方法.第19部分:用差分法测定热膨胀;德语版本EN 993-19:2004
2004-08-01
现行
UNE-EN 993-19-2004
Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method
致密成型耐火制品的试验方法第19部分:用差分法测定热膨胀
2004-11-26
现行
UNE-EN 993-16-1996
DENSE SHAPED REFRACTORY PRODUCTS. METHODS OF TEST. PART 16: DETERMINATION OF RESISTANCE TO SULPHURIC ACID.
致密成型耐火制品 试验方法 第16部分:耐硫酸性的测定
1996-07-15
现行
DIN EN 993-11
Methods of test for dense shaped refractory products - Part 11: Determination of resistance to thermal shock
致密成型耐火制品的试验方法.第11部分:抗热震性的测定;德文版EN 993-11:2007
2008-03-01
现行
UNE-EN 993-5-1999
METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 5: DETERMINATION OF COLD CRUSHING STRENGTH
致密成型耐火制品的试验方法第5部分:冷压强度的测定
1999-06-11
现行
UNE-EN 993-11-2008
Methods of test for dense shaped refractory products - Part 11: Determination of resistance to thermal shock
致密成型耐火制品的试验方法第11部分:抗热震性的测定
2008-07-02
现行
ISO 10059-1-1992
Dense, shaped refractory products — Determination of cold compressive strength — Part 1: Referee test without packing
致密成型耐火制品——冷压缩强度的测定第1部分:无包装的仲裁试验
1992-01-30
现行
UNE-EN 993-20-2004
Methods of test for dense shaped refractory products - Part 20: Determination of resistance to abrasion at ambient temperature
致密成型耐火制品的试验方法第20部分:环境温度下耐磨性的测定
2004-11-26
现行
DIN EN 993-7
Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures
致密成型耐火制品的试验方法.第7部分:高温下断裂模量的测定;德语版本EN 993-7:1998
1998-12-01