火力发电厂除灰设计技术规程(附条文说明)
Technical code for the design of ash handling system of fossil-fired power plant

2012-08-23

火力发电厂除灰除渣控制系统技术规程
Technical code for control system of ash and slag handling in fossil fuel power plants

2012-04-06

Stationary source emissions. Data acquisition and handling systems-Specification of requirements for the performance test of data acquisition and handling systems
固定源排放 数据采集和处理系统

2021-11-01

Wire-to-Air Performance Test Code for Blower Systems
鼓风机系统线对空性能测试规程

2019-10-31

间接空冷系统性能试验规程
Performance test code on indirect air-cooled system

2020-10-23

直接空冷系统性能试验规程
Performance test code on direct air-cooled system

2012-04-06

Stationary source emissions - Data acquisition and handling systems - Part 3: Specification of requirements for the performance test of data acquisition and handling systems
固定源排放数据采集和处理系统第3部分:数据采集和处理系统性能试验要求规范

2021-12-01

Measurement and control; performance tests on process computer systems; time measurement; function tested: interrupt handling with program start
测量和控制；过程计算机系统的性能测试；时间测量；功能测试:程序启动时的中断处理

1987-01-01

Measurement and control; performance tests on process computer systems; time measurement; function tested: generation of a executable code and program start
测量和控制；过程计算机系统的性能测试；时间测量；功能测试:生成可执行代码并启动程序

1987-01-01

공작기계 시험방법 ― 제 10부: 수치제어 공작기계의 프로브 측정시스템의 측정 성능 결정
机床测试代码 - 第10部分:确定数控机床探测系统的测量性能

2017-07-07

공작기계 시험방법 ― 제 10부: 수치제어 공작기계의 프로브 측정시스템의 측정 성능 결정
机床试验规程第10部分:数控机床探测系统测量性能的测定

2017-07-07

机床检验通则 第10部分：数控机床探测系统测量性能的测定
Test code for machine tools—Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools

2021-03-09

Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
机床试验规程第10部分:数控机床探测系统测量性能的测定

2022-03-24

Нормы и правила испытаний металлорежущих станков. Часть 10. Определение измерительных характеристик систем щупов металлорежущих станков с числовым программным управлением
机床测试代码 - 第10部分:数控机床探测系统测量性能的确定

2017-09-25