请注意:此版本的所有临时修订版将在您购买时提供。住宅防盗报警系统的安装和分类SUL 16411范围1。1本要求适用于连接成住宅防盗报警系统的报警保护产品和装置的安装。1.2这些要求包括将单个住宅的报警保护范围划分为基本保护或扩展保护的标准。1.3住宅防盗报警系统可以或不可以远程连接到中心站、专用站、住宅监控站或警察局。如果有远程连接，信号接收位置应符合以下标准的要求（如适用）: a） 中央车站报警服务标准UL 827；b） 专有防盗报警装置和系统标准，UL 1076；andc）根据与警察局连接的防盗报警装置和系统的标准，这些要求涵盖的UL 365.1.4报警系统具有可安装在室内或室外的发声装置。1.5这些系统符合美国国家电气规范NFPA 70第725条规定的2级遥控和信号电路的要求。根据《国家电气规范》NFPA 70.1.6第760条的规定，使用防火和防盗保护的系统可以运行。这些要求假定，标准电话操作规程可用于连接《国家电气规范》NFPA 70第800条规定的警察局或中央局的租用线路或其他线路。

Please note: All interim revisions for this edition available at time of your purchase will be included.Installation and Classification of Residential Burglar Alarm SystemsUL 16411 Scope1.1 These requirements apply to the installation of alarm protection products and devices connected to form a residential burglar alarm system.1.2 These requirements include the criteria for classifying the extent of alarm protection at an individual residence as either basic protection or expanded protection.1.3 A residential burglar alarm system may or may not have a remote connection to a central station, proprietary station, residential monitoring station, or police station. If there is a remote connection, the signal receiving location shall comply with the requirements in the following standards, as applicable:a) The Standard for Central-Station Alarm Services, UL 827;b) The Standard for Proprietary Burglar Alarm Units and Systems, UL 1076; andc) The Standard for Police Station Connected Burglar Alarm Units and Systems, UL 365.1.4 Alarm systems covered by these requirements have a sounding device that may be mounted indoors or outdoors.1.5 These systems comply with the requirements for Class 2 remote-control and signal circuits as defined by Article 725 of the National Electrical Code, NFPA 70. Systems using both fire and burglary protection operate as defined by Article 760 of the National Electrical Code, NFPA 70.1.6 The requirements assume that standard telephone operating practices may be used for leased or other lines connecting to a police or central station as defined by Article 800 of the National Electrical Code, NFPA 70.