1.1 ISO 15252的这一部分建立了环氧粉末模塑指定的数据块系统 化合物（EP-PMCs）。 1.2各种类型的EP-PMC通过基于以下的分类系统彼此区分 有关填料/增强材料类型和含量、预期加工方法、任何特殊 属性和专门用于指定目的的特殊属性（指定属性）。 1.3 ISO 15252的这一部分适用于所有以粉末、颗粒或 地面材料。 1.4这并不意味着具有相同名称的材料必然给出相同的名称 性能。ISO 15252的这一部分不提供工程数据、性能数据或加工数据 为特定应用和/或加工方法指定材料可能需要的条件。如果 如果需要此类附加性能，则应按照中规定的试验方法进行测定 本国际标准第2部分（如适用）。 1.5当本国际标准第3部分所涵盖的一般要求数据需要 如图所示，这也是使用该数据块系统完成的。 1.6确保代码字母和代码保持明确，并避免在 在数据块1、2或3中使用的任何新代码字母或代码编号应在使用前获得 ISO/TC 61/SC 1、SC 12和SC 13的秘书处。

1.1 This part of ISO 15252 establishes a data block system for the designation of epoxy powder moulding compounds (EP-PMCs). 1.2 The various types of EP-PMC are differentiated from each other by a classification system based on information about the filler/reinforcement type and content, the intended method of processing, any special properties and those of the special properties used specifically for designation purposes (designatory properties). 1.3 This part of ISO 15252 is applicable to all EP-PMCs ready for normal use in the form of powder, granules or ground material. 1.4 It is not intended to imply that materials having the same designation necessarily give the same performance. This part of ISO 15252 does not provide engineering data, performance data or data on processing conditions which may be required to specify a material for a particular application and/or method of processing. If such additional properties are required, they shall be determined in accordance with the test methods specified in part 2 of this International Standard, if suitable. 1.5 Whenever general requirement data, as covered by part 3 of this International Standard, need to be indicated, this is also done using this data block system. 1.6 To ensure that code-letters and code-numbers remain unambiguous, and to avoid conflicts within the system, any new code-letters or code-numbers for use in data block 1, 2 or 3 shall be approved before use by the secretariats of ISO/TC 61/SC 1, SC 12 and SC 13.