本欧洲标准规定了根据EN 206制造的紧凑型轻质，普通和重型混凝土制成的非增强预应力预应力混凝土产品的要求，基本性能标准和一致性评估，除夹带之外没有明显的夹带空气空气。还包括含有机械性能以外的纤维的混凝土钢，聚合物或其他纤维。它不包括具有开放结构的轻质骨料混凝土的预制加强部件。 它也可以用于指定没有标准的产品。本标准的所有要求（第4条）并非与所有预制混凝土产品相关。 如果存在特定的产品标准，则优先于此标准。 本标准涉及的预制混凝土制品是工厂生产的建筑和土木工程。如果生产受到恶劣天气条件的保护并受第6条规定的控制，本标准也可能适用于现场临时工厂生产的产品。 预制混凝土产品的分析和设计不在本标准的范围内，但在非地震区域确实提供了有关以下内容的信息: - 选择

This document specifies the requirements, the basic performance criteria and the Assessment and Verification of Constancy of Performance (AVCP) for unreinforced, reinforced and prestressed precast concrete products made of compact light-, normal- and heavyweight concrete according to EN 206 with no appreciable amount of entrapped air other than entrained air. Concrete containing fibres for other than mechanical properties (steel, polymer or other fibres) is also covered. It does not cover prefabricated reinforced components of lightweight aggregate concrete with open structure. It may also be used to specify products for which there is no standard. Not all of the requirements (Clause 4) of this standard are relevant to all precast concrete products. If a specific product standard exists, it takes precedence over this document. The precast concrete products dealt with in this standard are factory produced for building and civil engineering works. This document can also be applied to products manufactured in temporary plants on site if the production is protected against adverse weather conditions and controlled following Clause 6 provisions. The analysis and design of precast concrete products is not within the scope of this document but it does offer, for non-seismic zones, information about: - the choice of partial safety factors defined by the pertinent Eurocode; - the definition of some requirements for prestressed concrete products.