前言这是电缆管理系统的统一NCE、CSA集团和UL标准-电气安装用电缆扎带。这是NMX-J-623-ANCE，CSA C22的第三版。2号62275和UL 62275。此版本的NMX-J-623-ANCE，CSA C22。2编号62275和UL 62275取代2016年10月14日出版的前一版。本协调标准基于2018年8月发布的IEC出版物62275:第三版，电缆管理系统-电气装置用电缆扎带。IEC 62275的版权归IEC所有。本标准的制定符合加拿大标准委员会对加拿大国家标准的要求。CSA集团已将其作为加拿大国家标准发布。范围本文件规定了用于管理和支持电气装置布线系统的金属、非金属和复合电缆扎带及其相关固定装置的要求。 1DV。1 D2修改第1条，将第一段替换为以下内容:本标准规定了根据加拿大电气规范（CE规范）第一部分CSA C22，用于管理和支持电气装置布线系统的金属、非金属和复合电缆扎带及其相关固定装置和整体组件的要求。1、加拿大、墨西哥的电气安装标准NOM-001-SEDE和美国的国家电气规范（NEC）NFPA 70。电缆扎带和相关固定装置也可适用于其他应用，如果使用，可适用其他要求。本文件不包含评估扎带的任何电气绝缘性能或扎带提供的电缆机械保护的要求。本文件包含粘合剂固定装置与固体表面的机械接口要求。 它不考虑固体表面本身的机械行为。该文件不考虑机械接口，例如安装螺钉，而不是粘合剂到固体表面的固定装置。1DV。2 D2修改第1条，删除最后一段并添加以下注释:注1DV:当固定装置与固定装置一起提供或是固定装置的一部分时，本标准考虑固定装置与表面的机械固定装置，即整体固定装置的推式安装（见9.7.1、9.7.2和9.7.3）。

PrefaceThis is the harmonized ANCE, CSA Group, and UL standard for Cable management systems - Cable ties for electrical installations. It is the third edition of NMX-J-623-ANCE, CSA C22.2 No. 62275, and UL 62275. This edition of NMX-J-623-ANCE, CSA C22.2 No. 62275 and UL 62275 supersedes the previous edition published October 14, 2016. This harmonized standard is based on IEC Publication 62275: third edition, Cable management systems - Cable ties for electrical installations, issued August 2018. IEC 62275 is copyrighted by the IEC. This standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.ScopeThis document specifies requirements for metallic, non-metallic and composite cable ties and their associated fixing devices used for the management and support of wiring systems in electrical installations. 1DV.1 D2 Modify Clause 1 by replacing the first paragraph with the following: This Standard specifies requirements for metallic, non-metallic, and composite cable ties and their associated fixing devices and integral assemblies used for the management and support of wiring systems in electrical installations in accordance with the Canadian Electrical Code (CE Code), Part I, CSA C22.1, in Canada, Standard for Electrical Installations, NOM-001-SEDE, in Mexico, and the National Electrical Code (NEC), NFPA 70, in the United States of America.Cable ties and associated fixing devices can also be suitable for other applications and where so used, additional requirements can apply. This document does not contain requirements that evaluate any electrical insulation properties of the cable tie or mechanical protection of the cables provided by the cable tie. This document contains requirements for the mechanical interface of an adhesive fixing device to a solid surface. It does not consider the mechanical behaviour of the solid surface in itself.This document does not consider the mechanical interface, for example the mounting screw, of a fixing device other than adhesive to a solid surface. 1DV.2 D2 Modify Clause 1 by deleting the last paragraph and adding the following note: NOTE 1DV: This Standard considers the mechanical securement means of a fixing device to a surface when the means for securing is provided with the fixing device or is part of the fixing device, i.e., the push mount for an integral fixing device (See 9.7.1, 9.7.2, and 9.7.3).