ISO 1085:2016-螺丝和螺母装配工具 - 双头扳手 - 尺寸配对-国家数字标准馆

现行 ISO 1085:2016

到馆阅读

收藏跟踪

购买正版

Assembly tools for screws and nuts — Double-ended wrenches — Size pairing 螺丝和螺母装配工具 - 双头扳手 - 尺寸配对

发布日期： 2016-12-08

ISO 1085:2016规定了双端扳手的尺寸配对，其在平头上的标称宽度不相等。
注:本文件所涵盖的扳手为ISO 1703:2005中参考号为1 1 01 02 0、1 1 02 03 0、1 1 02 04 0、1 1 02 05 0、1 1 1 02 06 0、1 1 1 02 08 0的扳手。

ISO 1085:2016 specifies the size pairing of double-ended wrenches with unequal nominal widths across flats.
NOTE The wrenches covered by this document are those identified in ISO 1703:2005 under reference nos. 1 1 01 02 0, 1 1 02 03 0, 1 1 02 04 0, 1 1 02 05 0, 1 1 02 06 0, 1 1 02 08 0.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 25.140.30手持工具 - 手工工具

关联关系

研制信息

归口单位： ISO/TC 29/SC 10

相似标准/计划/法规

BS ISO 1085-2016

Assembly tools for screws and nuts. Double-ended wrenches. Size pairing
螺钉和螺母的装配工具双头扳手大小配对

UNE-ISO 1085-2008

Assembly tools for screws and nuts. Double-ended wrenches. Size pairing.
螺钉和螺母的装配工具双头扳手大小配对

Assembly tools for screws and nuts. Socket wrenches, double end. Technical specifications and tests.
螺钉和螺母的装配工具双头套筒扳手技术规格和测试

Assembly tools for screws and nuts — Double-headed open-ended engineers' wrenches — Outside dimensions
螺钉和螺母用装配工具-双头开口工程师&apos；扳手.外部尺寸

BS ISO 10102-2018

Assembly tools for screws and nuts. Double-headed open-ended engineers' wrenches. Outside dimensions
螺钉和螺母的装配工具双头开口工程扳手外部尺寸

ASSEMBLY TOOLS FOR SCREWS AND NUTS. DOUBLE-HEADED OPEN-ENDED WRENCHES,DOUBLE-HEADED RING WRENCHES AND COMBINATION WRENCHES. MAXIMUM WIDTHS OF HEADS.
螺钉和螺母的装配工具双头开口扳手、双头环形扳手和组合扳手头部的最大宽度

ASSEMBLY TOOLS FOR SCREWS AND NUTS. SPLINE DRIVE ENDS FOR POWER SOCKET WRENCHES. SIZES AND TOLERANCES.
螺钉和螺母的装配工具电动套筒扳手的花键驱动端尺寸和公差

Assembly tools for screws and nuts. Socket wrench, double end, flex head. Technical specifications and tests.
螺钉和螺母的装配工具套筒扳手双头挠性头技术规格和测试

Assembly tools for screws and nuts. Double-headed open-ended engineers wrenches. Technical specifications and tests.
螺钉和螺母的装配工具双头开口扳手技术规格和测试

UNE 16594-2-2002

Assembly tools for screws and nuts. Socket wrenches, double end. Part 2: Open socket wrenches. Technical specifications and test.
螺钉和螺母的装配工具双头套筒扳手第2部分:开口套筒扳手技术规格和测试

UNE 16594-1-2001

Assembly tools for screws and nuts. Socket wrenches, double end. Part 1: Close socket wrenches. Technical specifications and tests.
螺钉和螺母的装配工具双头套筒扳手第1部分:封闭套筒扳手技术规格和测试

Assembly tools for screws and nuts. Slugging wrenches with open end. Technical specifications.
螺钉和螺母的装配工具开口扳手技术规格

Assembly tools for screws and nuts — Open-ended wrenches, box wrenches and combination wrenches — Maximum widths of heads
螺丝和螺母装配工具 - 双头开口扳手双头环扳手和组合扳手 - 头部最大宽度

BS ISO 3318-2016

Assembly tools for screws and nuts. Open-ended wrenches, box wrenches and combination wrenches. Maximum widths of heads
螺钉和螺母的装配工具开口扳手、套筒扳手和组合扳手头部的最大宽度

Assembly tools for screws and nuts. Double-headed, flat and offset, box wrenches. Technical specifications and tests.
螺钉和螺母的装配工具双头平头和偏置套筒扳手技术规格和测试

Assembly tools for screws and nuts — Double-headed box wrenches, deep offset and modified offset — Outside dimensions
螺钉和螺母用装配工具.深偏置和改进偏置双头套筒扳手.外形尺寸

Assembly tools for screws and nuts — Doubled-headed box wrenches, flat and offset — Outside dimensions and test torques
螺钉和螺母用装配工具.平头和偏置双头套筒扳手.外部尺寸和试验扭矩

BS ISO 10104-2018

Assembly tools for screws and nuts. Double-headed box wrenches, deep offset and modified offset. Outside dimensions
螺钉和螺母的装配工具双头套筒扳手深偏置和改进偏置外部尺寸

Assembly tools for screws and nuts. Double-headed, deep offset and modified offset, box wrenches. Technical specifications and tests.
螺钉和螺母的装配工具双头深偏置和改进偏置套筒扳手技术规格和测试

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统