现行

GB/T 5102-2004

渐开线花键拉刀 技术条件
Broaches for involute spline--Technical specifications

2004-02-10

现行

BS 3550-1963

Specification for involute splines
渐开线花键规范

1963-01-30

现行

SAE ANSIB92.2M

Involute Splines and Inspection
渐开线花键及其检验

1989-03-01

现行

KS R 2001(2019 Confirm)

자동차용 인벌류우트 스플라인
汽车的渐开样条

1972-12-30

现行

SAE B-92.1/96

Involute Splines and Inspection
渐开线花键及其检验

1996-07-01

现行

SAE J498B_196507

INVOLUTE SPLINES, SERRATIONS, AND INSPECTION
渐开线花键、锯齿和检验

1965-07-01

现行

GB/T 18842-2008

圆锥直齿渐开线花键
Taper cylindrical involute splines

2008-09-27

现行

SAE B-92.1B

Involute Splines - 1996 Addendum
渐开线花键-1996补遗

1996-06-01

现行

JB/T 12641-2016

圆柱直齿渐开线花键 量仪
Straight cylindrical involute splines - Meter

2016-01-15

现行

SAE ARP1200A

Involute Splines; Wear Limit, Definition Of
渐开线花键；磨损极限

2000-01-01

现行

ANSI B92.1-1996

Involute Splines and Inspection, Inch Version
渐开线花键和检验 英制

1996-07-01

现行

GOST 6033-1951

Соединения зубчатые (шлицевые) эвольвентные
互换性渐开线样条的基本规范

现行

GB/T 5106-2012

圆柱直齿渐开线花键 量规
Straight cylindrical involute splines - Gauge

2012-12-31

现行

SME MS900362

Today'S Approach To Broaching Gears And Splines
当今拉削齿轮和花键的方法

1990-06-01

现行

JB/T 10756-2007

小模数渐开线花键滚轧机
Fine-pitch involute spline rolling machine

2007-08-01

现行

NAS 580

Involute Spline, Hole, 30 Full Fillet
渐开线花键 孔 30全圆角

2013-01-31

现行

NAS 579 Rev.2

Involute Spline 30 Degree Full Fillet
渐开线花键30度全圆角

2012-06-29

现行

GB/T 5104-2008

渐开线花键滚刀 基本型式和尺寸
The basic types and dimensions of hobs for involute splines

2008-08-28

现行

GB/T 5103-2004

渐开线花键滚刀 通用技术条件
The general technical specifications for involute splines hobs

2004-02-10

现行

SAE ARP179A

Involute Spline Gages (30~ Pressure Angle)
渐开线花键量规（30~压力角）

1949-05-01