范围:1.1本标准涵盖了纤维增强聚合物（FRP）湿铺复合材料系统、预固化FRP板和FRP棒的制造工艺和测试要求，这些FRP棒作为结构（混凝土、钢、木材和砌体）的结构加固材料进行外部粘结。1.2本标准涵盖了由玻璃、碳或芳纶纤维组成的FRP；和b）间苯二甲酸聚酯、乙烯基酯或环氧树脂。本标准仅涵盖构成FRP系统的织物和饱和树脂。底漆、粘合剂和腻子填料不在本文件范围内。1.3本标准涵盖连续、单向或双向的FRP系统- 定向纤维，采用湿铺法制造。本标准仅适用于双向纤维的FRP系统，双向纤维仅由一种类型的纤维组成，纤维取向为0°和90°。本规范不包括打算在多个方向上提供强度的双向层压板:这意味着对于取向为0°和90°的双向FRP系统，只有层压板的翘曲方向（取向为0°的纤维）提供强度。1.4本标准涵盖FRP钢筋或格栅的一部分，格栅具有实心棱柱形横截面，纵向上具有连续纤维。 1.5本标准涵盖标称横截面为矩形的FRP板。1.6在本标准中，FRP根据其纤维进行分类。1.7在本标准中，“应”用于表示要求，即用户为遵守本标准而有义务满足的规定；“应该”用于表示建议或建议但不需要的建议；“可”用于表示一个选项或在标准范围内允许的选项。注释随附条款不包括要求或替代要求；条款随附注释的目的是将规范性条款与解释性或信息性材料分开。 表和图的注释被视为表或图的一部分，可以作为要求编写。附件被指定为规范性（强制性）或信息性（非强制性）以定义其应用。

Scope:1.1This Standard covers the manufacturing process and testing requirements of fibre-reinforced polymer (FRP) wet layup composite systems, pre-cured FRP plates, and FRP bars externally bonded as structural strengthening materials for structures (concrete, steel, wood, and masonry).1.2This Standard covers FRPs comprised ofa) glass, carbon, or aramid fibres; andb) isophthalic polyester, vinylester, or epoxy resins.This Standard only covers the fabric and saturating resin that comprise the FRP system. Primers, adhesives, and putty fillers are outside the scope of this document.1.3This Standard covers FRP systems with continuous, unidirectional or bi-directional fibres, fabricated using wet layup. This Standard only covers FRP systems with bi-directional fibres made up with only one type of fibre and with fibers oriented 0° and 90°. Bi-directional laminates that intend to provide strength in more than one direction are not covered by this specification: it means that for bi-directional FRP systems oriented 0° and 90°, only the warp direction (fibres oriented 0°) of the laminate is providing strength.1.4This Standard covers FRP bars or bars that are part of a grid having solid prismatic cross sections with continuous fibres in the longitudinal direction.1.5This Standard covers FRP plates having nominally rectangular cross-section.1.6In this Standard, FRPs are classified on the basis of their fibres.1.7In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate normative clauses from explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.