AS/NZS 1462.29:2019-塑料管道和配件的试验方法方法29:塑料管道和管道系统.用外推法测定管形热塑性材料的长期静水压强度-国家数字标准馆

现行 AS/NZS 1462.29:2019

到馆提醒

收藏跟踪

购买正版

Methods of test for plastic pipes and fittings, Method 29: Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 塑料管道和配件的试验方法方法29:塑料管道和管道系统.用外推法测定管形热塑性材料的长期静水压强度

发布日期： 2019-12-15

本试验方法的目的是规定一种通过统计外推预测热塑性材料长期静水压强度的方法。该方法适用于适用温度下的所有类型热塑性塑料管。该试验方法是根据管道系统的试验数据制定的。

The objective of this Test Method is to specify a method for predicting the long-term hydrostatic strength of thermoplastics materials by statistical extrapolation. The method is applicable to all types of thermoplastics pipe at applicable temperatures. This Test Method was developed on the basis of test data from pipe systems.

分类信息

发布单位或类别：澳大利亚-澳大利亚/新西兰标准

关联关系

研制信息

相似标准/计划/法规

AS/NZS 1462.2-2006

Methods of test for plastics pipes and fittings, Method 2: Method for determining the flattening properties of plastics pipes and fittings
塑料管道和配件的试验方法方法2:塑料管道和配件压扁性能的测定方法

AS/NZS 1462.4-2002

Methods of test for plastics pipes and fittings, Method 4: Method for determining reversion of plastics pipes
塑料管和配件的试验方法方法4:塑料管回复性的测定方法

플라스틱 관 및 이음관－불투명도－시험 방법
塑料管及管件不透明度试验方法

KS M ISO 7686(2021 Confirm)

플라스틱 관 및 이음관－불투명도－시험 방법
塑料管道和管件不透明度试验方法

AS/NZS 1462.1-2006[ Pending Revision ]

Methods of test for plastics pipes and fittings, Method 1: Method for determining the dimensions of pipes and fittings
塑料管道和配件的试验方法方法1:管道和配件尺寸的测定方法

AS/NZS 1462.22-1997[ Pending Revision ]

Methods of test for plastics pipes and fittings, Method 22: Method for determination of pipe stiffness
塑料管道和配件的试验方法方法22:管道刚度的测定方法

AS/NZS 1462.16-2006

Methods of test for plastics pipes and fittings, Method 16: Method for high temperature testing of pipe
塑料管道和配件的试验方法方法16:管道高温试验方法

AS/NZS 1462.26-2003

Methods of test for plastics pipes and fittings, Method 26: Determination of weathering resistance of plastics pipes for external storage
塑料管和配件的试验方法方法26:外部贮存用塑料管耐候性的测定

BS ISO 13951-2015

Plastics piping systems. Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
塑料管道系统塑料管/管或管/配件组件耐拉伸载荷的试验方法

GOST R ISO 13951-2020

Трубопроводы из пластмасс. Метод определения стойкости узлов соединения труба/труба или труба/фитинг к растягивающей нагрузке
塑料管道系统塑料管/管或管/配件组件对拉伸载荷的阻力的测试方法

Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
塑料管道系统 - 塑料管道/管道或管道/配件组件对拉伸载荷的阻力的测试方法

AS/NZS 1462.3-1998

Methods of test for plastics pipes and fittings, Method 3: Method for determining the impact characteristics of pipes
塑料管道和配件的试验方法方法3:管道冲击特性的测定方法

AS/NZS 1462.8-2008

Methods of test for plastics pipes and fittings, Method 8: Method of testing the leaktightness of assemblies
塑料管道和配件的试验方法方法8:组件密封性试验方法

BS ISO 18851-2015

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test method to prove the structural design of fittings
塑料管道系统玻璃纤维增强热固性塑料（GRP）管道和配件证明配件结构设计的试验方法

Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test method to prove the structural design of fittings
塑料管道系统 - 玻璃增强热固性塑料（Grp）管道和配件 - 验证配件结构设计的测试方法

Methods of testing plastics waste fittings, Method 3: Methods for pressure testing of plastics waste fittings
塑料废料配件的试验方法方法3:塑料废料配件的压力试验方法

AS/NZS 1462.5-2002

Methods of test for plastics pipes and fittings, Method 5: Vicat softening temperature
塑料管和配件的试验方法方法5:维卡软化温度

AS/NZS 1462.21-1997

Methods of test for plastics pipes and fittings, Method 21: Method for determination of bond strength
塑料管道和配件的试验方法方法21:粘结强度的测定方法

AS/NZS 1462.23-2006[ Pending Revision ]

Methods of test for plastics pipes and fittings, Method 23: Method for determination of ring flexibility
塑料管和配件的试验方法方法23:环柔性的测定方法

BS EN ISO 16871-2003

Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering
塑料管道系统塑料管道和配件暴露于直接（自然）风化的方法

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统