ASTM F2162-01(2016)-轴承滚针针的标准规格:外圈完全补充无内圈开闭端标准型-国家数字标准馆

现行 ASTM F2162-01(2016)

到馆提醒

收藏跟踪

购买正版

Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type 轴承滚针针的标准规格:外圈完全补充无内圈开闭端标准型

发布日期： 2016-05-01

1.1
本规范涵盖了标准型滚针轴承，该轴承具有抽出的外圈、全套、无内圈、两端开口或闭合。
1.2
鼓励使用符合适用材料规范要求的回收材料，同时不影响物品的预期用途。
1.3
本规范中规定的内圈不适用于飞机的飞行关键系统。
1.4
以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。
注1:
本规范包含MS17131的许多要求，MS17131最初由国防部开发，目前由里士满国防供应中心维护。

1.1
This specification covers standard-type needle roller bearings having drawn outer rings, full complement, without inner rings, with either open or closed ends.
1.2
The use of recycled materials that meet the requirements of the applicable material specification without jeopardizing the intended use of the item is encouraged.
1.3
The inner rings specified in this specification are not intended for use in flight critical systems of aircraft.
1.4
The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Note 1:
This specification contains many of the requirements of MS17131, which was originally developed by the Department of Defense and is currently maintained by the Defense Supply Center Richmond.

分类信息

发布单位或类别：美国-美国材料与试验协会

ICS分类： 21.100.20轴承 - 滚动轴承

关联关系

研制信息

归口单位： F34.04

相似标准/计划/法规

ASTM F2163-01(2016)

Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring
环轴承内圈的标准规格:带外拉环的滚针轴承

MIL MS17130F Notice 1-Validation

RING, BEARING, INNER, FOR NEEDLE ROLLER BEARING WITH DRAWN OUTER RING (SUPERSEDING MS17103E)
轴承内圈用于带拉制外圈的滚针轴承（取代MS17103E）

MIL MS17130F Notice 2-Inactivation

RING, BEARING, INNER, FOR NEEDLE ROLLER BEARING WITH DRAWN OUTER RING (SUPERSEDING MS17103E)
轴承内圈用于带拉制外圈的滚针轴承（取代MS17103E）

RING, BEARING, INNER, FOR NEEDLE ROLLER BEARING WITH DRAWN OUTER RING (SUPERSEDING MS17103E)
内圈轴承用于带拉拔外圈的滚针轴承（代替MS17103E）

ASTM F2431-04(2018)

Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
环轴承标准规格内圈:带厚外圈的滚针轴承

ASTM F2246-06(2022)

Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
轴承、滚柱、滚针的标准规范:带滚柱和保持架的厚外圈

MIL MS17130F Notice 3-Cancellation

RING, BEARING, INNER, FOR NEEDLE ROLLER BEARING WITH DRAWN OUTER RING (SUPERSEDING MS17103E)(S/S BY ASTM-F2163)
轴承内圈用于带拉制外圈的滚针轴承（取代MS17103E）（由ASTM-F2163制造）

MIL MS52141 Notice 1-Inactivation

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, CAGED, WITHOUT INNER RING OPEN AND CLOSED END, STANDARD TYPE
轴承滚柱滚针拉制外圈笼式无内圈开口和闭合端标准型

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, CAGED, WITHOUT INNER RING OPEN AND CLOSED END, STANDARD TYPE
轴承、滚柱、滚针、拉制外圈、保持架、无内圈开口端和封闭端、标准型

MIL MS52142A Notice 4-Revision

Bearing, Roller, Needle, Drawn Outer Ring, Full Complement, Without Inner Ring, Open End, Extra Precision Type
轴承滚子滚针拉制外圈完全互补无内圈开口端超精密型

MIL MS17131H Notice 1-Inactivation

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, FULL COMPLEMENT, WITHOUT INNER RING, OPEN AND CLOSED END, STANDARD TYPE (SUPERSEDING MS17131G)
轴承滚子滚针拉制外圈全套无内圈开口和封闭端标准型（取代MS17131G）

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, FULL COMPLEMENT, WITHOUT INNER RING, OPEN AND CLOSED END, STANDARD TYPE (SUPERSEDING MS17131G)
轴承、滚柱、滚针、拉制外圈、全套、无内圈、开式和闭式端、标准型（取代MS17131G）

ASTM F2430-04(2018)

Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)
轴承滚针针的标准规格:组装（厚外圈）

MIL MS52142A Notice 2-Inactivation

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, FULL COMPLEMENT, WITHOUT INNER RING, OPEN END, EXTRA PRECISION TYPE (SUPERSEDING MS52142)
轴承滚子滚针拉制外圈全套无内圈开口端超精密型（取代MS52142）

MIL MS52142A Notice 3-Validation

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, FULL COMPLEMENT, WITHOUT INNER RING, OPEN END, EXTRA PRECISION TYPE (SUPERSEDING MS52142)
轴承滚子滚针拉制外圈全套无内圈开口端超精密型（取代MS52142）

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, FULL COMPLEMENT, WITHOUT INNER RING, OPEN END, EXTRA PRECISION TYPE (SUPERSEDING MS52142)
轴承、滚柱、滚针、拉制外圈、全套、无内圈、开口端、超精密型（取代MS52142）

MIL MS17131H Notice 2-Cancellation

BEARING, ROLLER, NEEDLE, DRAWN OUTER RING, FULL COMPLEMENT, WITHOUT INNER RING, OPEN AND CLOSED END, STANDARD TYPE (SUPERSEDING MS17131G)(S/S BY ASTM-F2162)
标准型（取代MS17131G）（由ASTM-F2162生产的全套、无内环、开口端和封闭端滚针轴承）

JIS B 1536-2-2008

Rolling bearings -- Boundary dimensions and tolerances of needle roller bearings -- Part 2: Drawn cup without inner ring (Foreign Standard)
滚动轴承滚针轴承的外形尺寸和公差第2部分:无内环拉拔杯（国外标准）

구름 베어링 — 내륜이 없는 드로잉 컵형 니들 롤러 베어링 — 경계 치수 및 제품의 형상 명세(GPS)
滚动轴承 - 带拉拔杯和无内圈的滚针轴承 - 边界尺寸几何产品规格（Gps）和公差值

Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
滚动轴承.带拉制外圈和无内圈的滚针轴承.外形尺寸、几何产品规范（GPS）和公差值

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统