首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ISO 8437-2:2019
到馆阅读
收藏跟踪
购买正版
Snow throwers — Safety requirements and test procedures — Part 2: Pedestrian-controlled snow throwers 抛雪机.安全要求和试验程序.第2部分:行人控制的抛雪机
发布日期: 2019-07-30
本文件规定了适用于内燃机驱动的行人控制抛雪器的安全要求。它旨在与ISO 8437-1和ISO 8437-4一起使用,以达到行人控制的雪地喷射器的全部要求和验证方法。 ISO 8437系列涉及与按预期使用的、在制造商合理预见的条件下使用的抛雪器有关的重大危险、危险情况和事件。 它不适用于以下情况: -电动和电池驱动的除雪器; -手持抛雪器; -机场或公路除雪机械和设备; -用于潜在爆炸性环境的机器。 它不处理与以下相关的危险: -超过42伏的电池电路; -电源连接的起动马达; -磁接地电路; -工作环境; -电磁兼容性。 ISO 8437系列不适用于出版日期之前制造的机器。
This document specifies safety requirements applicable to combustion engine powered pedestrian-controlled snow throwers. It is intended to be used with ISO 8437-1 and ISO 8437-4 to achieve the full requirements and means of verification for pedestrian-controlled snow throwers. The ISO 8437 series deals with significant hazards, hazardous situations and events relevant to snow throwers used as intended and under the conditions reasonably foreseeable by the manufacturer. It does not apply to the following: — electrically powered and battery powered snow throwers; — hand-held snow throwers; — airport or highway snow removal machines and equipment; — machines intended for use in potentially explosive atmospheres. It does not deal with hazards related to the following: — battery circuits exceeding 42 V; — mains connected starting motor; — magneto grounding circuits; — working environment; — electromagnetic compatibility. The ISO 8437 series is not applicable to machines that were manufactured before the date of its publication.
分类信息
关联关系
研制信息
归口单位: ISO/TC 23/SC 13
相似标准/计划/法规
现行
BS EN ISO 8437-3-2021
Snow throwers. Safety requirements and test procedures-Ride-on snow throwers
扔雪机 安全要求和测试程序
2021-04-29
现行
ISO 8437-3-2019
Snow throwers — Safety requirements and test procedures — Part 3: Ride-on snow throwers
抛雪机.安全要求和试验程序.第3部分:乘坐式抛雪机
2019-07-30
现行
BS EN ISO 8437-2-2021
Snow throwers. Safety requirements and test procedures-Pedestrian-controlled snow throwers
扔雪机 安全要求和测试程序
2021-04-30
现行
GB/T 43326.2-2023
抛雪机 安全要求和试验方法 第2部分:步进式抛雪机
Snow throwers—Safety requirements and test methods—Part 2: Pedestrian-controlled snow throwers
2023-11-27
现行
GB/T 43326.3-2023
抛雪机 安全要求和试验方法 第3部分:坐骑式抛雪机
Snow throwers—Safety requirements and test methods—Part 3: Ride-on snow throwers
2023-11-27
现行
ISO 8437-1-2019
Snow throwers — Safety requirements and test procedures — Part 1: Terminology and common tests
抛雪机.安全要求和试验程序.第1部分:术语和一般试验
2019-07-30
现行
BS EN ISO 8437-4-2021
Snow throwers. Safety requirements and test procedures-Additional national and regional requirements
扔雪机 安全要求和测试程序
2021-05-05
现行
ISO 8437-4-2019
Snow throwers — Safety requirements and test procedures — Part 4: Additional national and regional requirements
抛雪机.安全要求和试验程序.第4部分:国家和地区附加要求
2019-07-30
现行
GB/T 43326.1-2023
抛雪机 安全要求和试验方法 第1部分:术语和通用试验
Snow throwers—Safety requirements and test methods—Part 1: Terminology and common tests
2023-11-27
现行
GB/T 43326.4-2023
抛雪机 安全要求和试验方法 第4部分:国家和地区的附加要求
Snow throwers—Safety requirements and test methods—Part 4: Additional national and regional requirements
2023-11-27