BS EN 16732:2015规定了以下特性的性能水平和试验方法 由安装在胶带上的联锁部件制成的滑动紧固件:拉拔器的强度 附件，封闭式，顶部挡块，开放式滑动紧固件盒，往复机构，封闭式滑块 横向延伸时的紧固件，横向延伸时的开放式附件，滑块锁紧装置， 以及开口式滑扣、单纵梁滑块保持力和滑块抗扭矩。注:附录B至K中规定的试验是专门设计的，以允许其直接应用 为用户提供合理保证，确保滑扣符合以下要求: 本标准的要求可以令人满意地实现其预期目的。附件L提供了以下信息: 滑动紧固件批量取样程序。 此外，还规定了耐洗色牢度、干洗色牢度和耐水色牢度的性能水平， 以及洗涤和干洗的尺寸稳定性。本标准不适用于一般的滑块紧固件 专用紧固件（例如:潜水服用压力密封滑动紧固件）。交叉引用:EN 20105-A02ISO 105-A02EN 20105-A03ISO 105-A03EN ISO 105-C06ISO 105-D01ISO 105-D01EN ISO 105-E01ISO 105-E01EN ISO 139EN ISO 3175-2ISO 3175-2ISO 5077ISO 5077EN ISO 6330BS 3084:2006NF G 91-005:1984ASTM D2061-07EN ISO 7500-1ISO 7500-1ISO 2859-1购买本文件时提供的所有现行修订版均包含在购买本文件中。

BS EN 16732:2015 specifies performance levels and test methods for the following characteristics of slide fasteners made from interlocking components mounted on tapes: strengths of puller attachment, closed-end, top stop, open-end slide fastener box, reciprocating mechanism, closed slide fastener when extended laterally, open-end attachment when extended laterally, slider locking device, and open-end slide fastener single stringer slider retention and slider resistance to torque.NOTE The tests specified in Annexes B to K have been specifically devised to permit their direct application to finished slide fasteners with a view to giving the user reasonable assurance that a slide fastener conforming to the requirements of this standard can satisfactorily fulfil its intended purpose. Annex L gives information about sampling procedures for bulk quantities of slide fasteners.In addition, performance levels are also specified for colour fastness to washing, dry cleaning and water, and for dimensional stability to washing and dry cleaning.This European Standard is applicable to slide fasteners for general use and is not applicable to slide fasteners for specialist purposes (for example: pressure sealed slide fasteners for diving suits).Cross References:EN 20105-A02ISO 105-A02EN 20105-A03ISO 105-A03EN ISO 105-C06ISO 105-C06EN ISO 105-D01ISO 105-D01EN ISO 105-E01ISO 105-E01EN ISO 139ISO 139EN ISO 3175-2ISO 3175-2EN ISO 5077ISO 5077EN ISO 6330ISO 6330BS 3084:2006NF G 91-005:1984ASTM D2061-07EN ISO 7500-1ISO 7500-1ISO 2859-1All current amendments available at time of purchase are included with the purchase of this document.