请注意:此版本的所有临时修订版将在您购买时提供。干式通用和电力变压器UL 15611.1这些要求包括:根据国家电气规范ANSI/NFPA 70使用的风冷、干燥、通风和非通风型通用和电力变压器。结构包括升压、降压、绝缘和自耦变压器型变压器，以及气冷和干式电抗器或一般用途，以及裸露铁心的电力变压器、空气变压器- 根据国家电气规范ANSI/NFPA 70，使用额定值大于10 kVA的冷却、干燥和复合填充型。结构包括升压、降压、绝缘和自耦变压器型变压器，以及风冷、干式和复合填充式电抗器。1.2这些要求不包括高强度放电（HID）灯（金属卤化物、汞蒸汽和钠型）或荧光灯、外露铁芯变压器、复合填充变压器、液体- 其他电气设备要求中涵盖的填充变压器、调压器、通用或特殊类型的变压器、构成工业控制设备一部分的自耦变压器、电动机起动自耦变压器、可变电压自耦变压器、标称一次或二次额定值超过600伏的变压器，或额定电压大于660伏的过压分接头。1.3这些要求不包括配备波形整形或整流电路的变压器。 波整形或整流电路可包括二极管和晶体管等元件。电容器、瞬态电压浪涌抑制器和电涌放电器等部件不被视为波形成形或整流装置。

Please note: All interim revisions for this edition available at time of your purchase will be included.Dry-Type General Purpose and Power TransformersUL 15611.1 These requirements cover:General purpose and power transformers of the air-cooled, dry, ventilated, and nonventilated types to be used in accordance with the National Electrical Code, ANSI/NFPA 70. Constructions include step up, step down, insulating, and autotransformer type transformers as well as air-cooled and dry-type reactors orGeneral purpose and power transformers of the exposed core, air-cooled, dry, and compound-filled types rated more than 10 kVA to be used in accordance with the National Electrical Code, ANSI/NFPA 70. Constructions include step up, step down, insulating, and autotransformer type transformers as well as air-cooled, dry, and compound-filled type reactors.1.2 These requirements do not cover ballasts for high intensity discharge (HID) lamps (metal halide, mercury vapor, and sodium types) or fluorescent lamps, exposed core transformers, compound-filled transformers, liquid-filled transformers, voltage regulators, general use or special types of transformers covered in requirements for other electrical equipment, autotransformers forming part of industrial control equipment, motor-starting autotransformers, variable voltage autotransformers, transformers having a nominal primary or secondary rating of more than 600 volts, or overvoltage taps rated greater than 660 volts.1.3 These requirements do not cover transformers provided with waveshaping or rectifying circuitry. Waveshaping or rectifying circuits may include components such as diodes and transistors. Components such as capacitors, transient voltage surge suppressors, and surge arresters are not considered to be waveshaping or rectifying devices.