BS ISO 22462:2020-金属和其他无机涂层化学转化涂层摩擦系数测量的试验方法-国家数字标准馆

现行 BS ISO 22462:2020

到馆提醒

收藏跟踪

购买正版

Metallic and other inorganic coatings. Test method for the friction coefficient measurement of chemical conversion coatings 金属和其他无机涂层化学转化涂层摩擦系数测量的试验方法

发布日期： 2020-06-17

本文件规定了测量化学转化摩擦系数的试验方法
涂层板材产品和卷材产品。
本文件适用于测量或比较热浸镀锌，
在相同条件下进行试验时，使用润滑和树脂涂层钢板。购买本文件时可获得的所有当前修订均包含在购买本文件中。

This document specifies a test method to measure the friction coefficient of chemical conversion
coating sheet products and coiled products.
This document is applicable to measure or compare the friction properties of hot-dip galvanized,
lubricated and resin coated steel sheet, when tested under the same conditions.All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

Metallic and other inorganic coatings — Test method for the friction coefficient measurement of chemical conversion coatings
金属和其他无机涂层.化学转化涂层摩擦系数测量的试验方法

BS EN 13144-2018

Metallic and other inorganic coatings. Method for quantitative measurement of adhesion by tensile test
金属和其他无机涂层用拉伸试验定量测量附着力的方法

UNE-EN 13144-2003

Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test
金属和其他无机涂层.通过拉伸试验定量测量附着力的方法

BS EN ISO 4521-2008

Metallic and other inorganic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes. Specification and test methods
金属和其他无机涂层工程用电沉积银和银合金涂层规范和试验方法

BS EN ISO 13123-2011

Metallic and other inorganic Coatings. Test method of cyclic heating for thermal barrier coatings under temperature gradient
金属和其他无机涂层温度梯度下热障涂层循环加热试验方法

GB/T 42261-2022

金属及其他无机覆盖层温度梯度下热障涂层热循环试验方法
Metallic and other inorganic coatings—Test method of cyclic heating for thermal-barrier coatings under temperature gradient

Metallic and other inorganic coatings — Test method of cyclic heating for thermal-barrier coatings under temperature gradient
金属和其他无机涂层——温度梯度下热障涂层的循环加热试验方法

Metallic and other inorganic coatings — Electrodeposited silver and silver alloy coatings for engineering purposes — Specification and test methods
金属和其他无机涂层——工程用电沉积银和银合金涂层——规范和试验方法

Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates — Rating of test specimens and manufactured articles subjected to corrosion tests
金属基材上金属和其他无机涂层的腐蚀试验方法——进行腐蚀试验的试样和制成品的等级

BS ISO 10587-2000

Metallic and other inorganic coatings. Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods. Inclined wedge method
金属和其他无机涂层金属涂层和未涂层外螺纹制品和杆的残余脆化试验斜楔法

KS D ISO 10587(2022 Confirm)

금속과 무기질 피막 - 외부나사제품과 봉의 잔류수소취성 측정방법 - 경사쐐기 방법
金属和其他无机涂层？金属涂层和无涂层外螺纹制品和杆的残余脆化试验？斜楔法

KS D ISO 10587(2017 Confirm)

금속과 무기질 피막 - 외부나사제품과 봉의 잔류수소취성 측정방법 - 경사쐐기 방법
金属和其他无机涂层？金属涂层和无涂层外螺纹制品和杆的残余脆化试验？斜楔法

GB/T 26107-2010

金属与其他无机覆盖层镀覆和未镀覆金属的外螺纹和螺杆的残余氢脆试验斜楔法
Metallic and other inorganic coatings - Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods - Inclined wedge method

Metallic and other inorganic coatings — Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods — Inclined wedge method
金属和其他无机涂层——金属涂层和未涂层外螺纹制品和杆的残余脆化试验——斜楔法

BS ISO 14188-2012

Metallic and other inorganic coatings. Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
金属和其他无机涂层测量热障涂层的热循环阻力和热冲击阻力的试验方法

GB/T 34625-2017

金属及其他无机覆盖层电气、电子和工程用金和金合金电镀层技术规范和试验方法
Metallic and other inorganic coatings—Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes—Specification and test methods

Metallic and other inorganic coatings — Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes — Specification and test methods
金属和其他无机涂层——电气、电子和工程用电沉积金和金合金涂层——规范和试验方法

Metallic and other inorganic coatings — Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
金属和其他无机涂层——测量热障涂层的热循环阻力和热冲击阻力的试验方法

GB/T 42259-2022

金属及其他无机覆盖层热障涂层耐热循环与热冲击性能测试方法
Metallic and other inorganic coatings—Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings

DIN EN ISO 4521

Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods (ISO 4521:2008)
金属和其他无机涂层.工程用电沉积银和银合金涂层.规范和试验方法（ISO 4521-2008）；德文版EN ISO 4521:2008

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统