现行

KS R IEC 62196-1(2020 Confirm)

플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛 — 전기자동차의 전도성 충전 — 제1부: 일반 요구사항
插头 插座 车辆连接器和车辆入口 - 电动车辆的导电充电第1部分:一般要求

2015-05-07

现行

IEC 62196-1-2022

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
插头、插座、车辆连接器和车辆插孔.电动车辆的传导充电.第1部分:一般要求

2022-05-03

现行

IEC 62196-1-2022 CMV

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
插头、插座、车辆连接器和车辆插孔.电动车辆的传导充电.第1部分:一般要求

2022-05-03

现行

KS R IEC 62196-1

플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛 — 전기자동차의 전도성 충전 — 제1부: 일반 요구사항
插头、插座、车辆连接器和车辆插座电动车辆的导电充电第1部分:一般要求

2024-01-05

现行

GOST R IEC 62196-1-2013

Вилки, штепсельные розетки, соединители и вводы для транспортных средств. Кондуктивная зарядка для электромобилей. Часть 1. Общие требования
插头 插座 连接器和套管的车辆 传导充电的电动汽车 第1部分:通用要求

现行

BS PD IEC TS 62196-3-1-2020

Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles-Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system
插头、插座、车辆连接器和车辆插孔 电动汽车的传导充电

2020-03-31

现行

IEC TS 62196-3-1-2020

Plugs,socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system
插头、插座、车辆连接器和车辆插孔.电动汽车的传导充电.第3-1部分:与热管理系统一起使用的直流充电用车辆连接器、车辆插孔和电缆组件

2020-03-26

现行

KS R IEC TS 62196-3-1

플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛 — 전기자동차의 전도성 충전 — 제3-1부: 열관리시스템과 같이 사용하기 위한 직류 충전용 자동차 커넥터, 자동차 인렛 및 케이블 어셈블리
插头 插座 车辆连接器和车辆插孔.电动车辆的传导充电.第3-1部分:与热管理系统一起使用的直流充电用车辆连接器 车辆插孔和电缆组件

2020-12-24

现行

IEC PAS 63472-2023

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Dimensional compatibility description for configuration FF AC/DC contact-tube vehicle coupler
插头、插座、车辆连接器和车辆插孔 电动车辆的传导充电 FF AC/DC接触管车辆耦合器配置的尺寸兼容性描述

2023-05-04

现行

IEC 62196-2-2022

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories
插头、插座、车辆连接器和车辆插座.电动车辆的导电充电.第2部分:交流插脚和接触管附件的尺寸兼容性要求

2022-10-19

现行

KS R IEC 62196-2

플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛 — 전기자동차의 전도성 충전 — 제2부: 교류 핀과 접촉 튜브 부속품에 대한 치수 적합성 요구사항
插头、插座、车辆连接器和车辆插座电动车辆的导电充电第2部分:交流插针和接触管附件的尺寸兼容性要求

2024-01-05

现行

KS R IEC 62196-2

플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛 — 전기자동차의 전도성 충전 — 제2부: 교류 핀과 접촉 튜브 부속품에 대한 치수 적합성 및 상호 호환성 요구사항
插头 插座插座 车辆连接器和车辆入口 - 电动车辆的导电充电 - 第2部分:尺寸兼容性和互换性要求对于A.C.针和接触管配件

2019-10-25

现行

IEC 62196-3-2022

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
插头、插座、车辆连接器和车辆插座.电动车辆的导电充电.第3部分:直流和交流/直流插针和接触管车辆耦合器的尺寸兼容性要求

2022-10-19

现行

KS R IEC 62196-3

플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛 — 전기자동차의 전도성 충전 — 제3부: 직류 및 교류/직류 핀과 접촉 튜브 자동차 커플러에 대한 치수 적합성 요구사항
插头、插座、车辆连接器和车辆插座电动车辆的导电充电第3部分:直流和交流/直流插针和接触管车辆耦合器的尺寸兼容性要求

2024-01-05

现行

UNE-EN 62196-1-2004

Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles -- Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c.
插头、插座、车辆耦合器和车辆插孔.电动汽车的传导充电.第1部分:交流250A和直流400A以下电动汽车的充电

2004-06-11

现行

VDE 0623-5-1/A11-2013/DIN EN 62196-1/A11

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements; German version EN 62196-1:2012/A11:2013
插头、插座、车辆连接器和车辆插孔.电动汽车的传导充电.第1部分:一般要求；德文版EN 62196-1:2012/A11:2013

2013-09-01

现行

VDE 0623-5-1/A11-2013/DIN EN 62196-1/A11

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements; German version EN 62196-1:2012/A11:2013
插头、插座、车辆连接器和车辆插孔.电动汽车的传导充电.第1部分:一般要求；德文版EN 62196-1:2012/A11:2013

2013-09-01

现行

KS R IEC 62196-3

플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛?전기자동차의 전도성 충전?제3부: 직류 및 교류/직류 핀과 접촉 튜브 자동차 커플러에 대한 치수 적합성 및 상호 호환성 요구사항
插头 插座 车辆连接器和车辆入口 - 电动车辆的导电充电第3部分:直流的尺寸兼容性和互换性要求 和A.c./d.c 销和接触管车辆耦合器

2017-12-22

现行

DIN EN 62196-1/AB-DRAFT

Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements; German version EN 62196-1:2012/FprAB:2013
起草文件——插头、插座、车辆连接器和车辆插孔——电动汽车的传导充电——第1部分:一般要求；德文版EN 62196-1:2012/FprAB:2013

2014-05-01

现行

DIN EN 62196-1/A1-DRAFT

Draft Document - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements (IEC 23H/389A/CD:2017); Text in German and English
文件草案——插头、插座、车辆连接器和车辆插孔——电动汽车的传导充电——第1部分:一般要求（IEC 23H/389A/CD:2017）；德语和英语文本

2018-06-01