首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 GB/T 39207-2020
到馆阅读
收藏跟踪
购买正版
锚处理系统安装与调试规程 Code of practice for installation and commissioning of anchor handling system
发布日期: 2020-10-11
实施日期: 2021-05-01
本标准规定了锚处理系统的安装前准备、安装质量、安装程序、安装检验及调试要求。本标准适用于锚处理系统的安装与调试
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
BS 8539-2012+A1-2021
Code of practice for the selection and installation of post-installed anchors in concrete and masonry
混凝土和砌体中后安装锚的选择和安装实施规程
2021-03-17
现行
GB/T 39208-2020
可伸缩式全回转舵桨装置安装与调试规程
Code of practice for installation and commissioning of retractable azimuth thruster
2020-10-11
现行
GB/T 39206-2020
固定式全回转舵桨装置安装与调试规程
Code of practice for installation and commissioning of fixed azimuth thruster
2020-10-11
现行
BS 12/30215639 DC
BS 8539. Code of practice for the selection and installation of post-installed anchors in concrete and masonry
英国标准8539 混凝土和砌体中后安装锚的选择和安装实施规程
2012-02-24
现行
GB/T 39184-2020
ROV收放装置/脐带绞车安装与调试规程
Code of practice for installation and commissioning of ROV launch and recovery system/umbilical winch
2020-10-11
现行
BS 7883-2019
Personal fall protection equipment. Anchor systems. System design, installation and inspection. Code of practice
个人坠落防护设备 锚定系统 系统设计、安装和检查 业务守则
2019-11-29
现行
GB/T 39230-2020
重型海底电缆收放装置安装与调试规程
Code of practice for installation and commissioning of heavy duty submarine cable recovery and releasing device
2020-11-19
现行
ISO/TS 10839-2022
Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation
气体燃料供应用聚乙烯管和配件.设计、搬运和安装实施规程
2022-07-22
现行
BS 8512-2008
Electric cables. Code of practice for the storage, handling, installation and disposal of cables on wooden drums
电缆 木质卷筒上电缆的储存、搬运、安装和处置实施规程
2008-03-31
现行
BS 5306-3-2017
Fire extinguishing installations and equipment on premises-Commissioning and maintenance of portable fire extinguishers. Code of practice
房屋内的灭火装置和设备
2017-10-31
现行
BS 5839-1-2017 EXCOMM
Fire detection and alarm systems for buildings-Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises
建筑物火灾探测和报警系统
2022-02-11
现行
BS 5839-9-2021
Fire detection and fire alarm systems for buildings-Code of practice for the design, installation, commissioning and maintenance of emergency voice communication systems
建筑物火灾探测和火灾报警系统
2021-08-26
现行
BS 6880-3-1988
Code of practice for low temperature hot water heating systems of output greater than 45 kW-Installation, commissioning and maintenance
输出功率大于45kW的低温热水供暖系统实施规程 安装、调试和维护
1988-02-29
现行
BS 8418-2021 EXCOMM
Expert Commentary for BS 8418:2021. Design, installation, commissioning and maintenance of detector-activated video surveillance systems (VSS). Code of practice
BS 8418:2021的专家评论 探测器激活视频监控系统(VSS)的设计、安装、调试和维护 业务守则
2021-08-13
现行
BS 5839-6-2019+A1-2020
Fire detection and fire alarm systems for buildings-Code of practice for the design, installation, commissioning and maintenance of fire detection and fire alarm systems in domestic premises
建筑物火灾探测和火灾报警系统
2020-10-28
现行
ISO 6993-4-2006
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 4: Code of practice for design, handling and installation
气体燃料供应用埋地高冲击聚氯乙烯(PVC-HI)管道系统Spart 4:设计、搬运和安装实施规程
2006-06-14
现行
BS ISO 22621-6-2010
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar). Polyamide (PA)-Code of practice for design, handling and installation
最大工作压力不超过2 MPa(20 bar)的气体燃料供应用塑料管道系统 聚酰胺(PA) 设计、搬运和安装实施规程
2010-05-31
现行
ISO 16486-6-2023
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation
气体燃料供应用塑料管道系统.熔融连接和机械连接的未增塑聚酰胺(PA-U)管道系统.第6部分:设计、操作和安装实施规程
2023-10-18
现行
BS 5839-6-2019 EXCOMM
Expert Commentary for BS 5839-6:2019. Fire detection and fire alarm systems for buildings-Code of practice for the design, installation, commissioning and maintenance of fire detection and fire alarm systems in domestic premises
BS 5839-6:2019的专家评论 建筑物火灾探测和火灾报警系统
2019-08-20
现行
DIN ISO 16486-6
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 6: Code of practice for design, handling and installation (ISO 16486-6:2012)
气体燃料供应用塑料管道系统.带熔合连接和机械连接的未增塑聚酰胺(PA-U)管道系统.第6部分:设计、搬运和安装实施规程(ISO 16486-6-2012)
2015-07-01