MIL-PRF-39016H涵盖了用于电子和通信设备的电磁密封继电器的一般要求（见6.1）。这些继电器设计用于在从低电平到电源切换的全范围内工作，触点额定值高达5安培交流电（ac）或直流电（dc）。在本文规定的额定负载条件下，基于+125°C下的100000次循环，在90%的合格置信度和60%的合格维护置信度下确定故障率水平。警告:使用任何低于额定线圈电压的线圈电压都会影响继电器的运行。 警告:拾取、保持和退出电压仅用于测试目的，不得用作设计标准。有关其他应用和警告信息，请参见6.1。

MIL-PRF-39016H covers the general requirements for electromagnetic, hermetically sealed relays for use in electronic and communication-type equipment (see 6.1). These relays are designed to operate over the full range from low level to power switching with contact ratings up to 5 amperes alternating current (ac) or direct current (dc). The failure rate level is established at a confidence level of 90 percent for qualification and 60 percent for maintenance of qualification based on 100,000 cycles at +125 Degrees C under the rated load conditions specified herein. CAUTION: The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. CAUTION: Pick-up, hold, and dropout voltages are for test purposes only and are not to be used as design criteria. For additional application and caution information, see 6.1.