本欧洲标准适用于3.1中定义的车载液压平台（HP），旨在用于消防和救援服务。惠普可能会参与消防，抢救或保护人员，保护环境以及各种其他技术操作。 本文档确定了消防和救援服务使用的所有大小的HP的重大危害（见第4条），其基础是以完整的形式提供，经过测试并可以使用。它还提供了消除或减少这些危害的方法。本文档仅适用于根据EN 280:2001，1.4的分类为B类1类的HP。 注1:B类ï1型的HP是负载重心垂直投影可能在潮汐线外面，HP只能在其行驶状态下行驶的HP。 因此，本文档不适用于HP，根据EN 280:2001，1.4: - A组 - 1型; - A组 - 2型; - A组3型; - B组 - 2型; - B组 - 3型。 本文件旨在与EN 1846 2和EN 1846 3一起使用。 本文件涉及技术安全要求，以尽量减少可能出现的第4条所列危害

This European Standard applies to vehicle mounted Hydraulic Platforms (HP's) as defined in 3.1, intended for use by fire and rescue services. HP's may participate in fire fighting, rescue or protection of persons, protection of the environment and in a variety of other technical operations. This document identifies the significant hazards (see Clause 4) for all sizes of HP's used by fire and rescue services, on the basis that they are supplied in a complete form, tested and ready for use. It also gives methods for the elimination or reduction of these hazards. This document applies only to HP's classified in group B  type 1 according to EN 280:2001, 1.4. NOTE 1 HPs of group B  type 1 are those where the vertical projection of the centre of gravity of the load may be outside the tipping lines and for which travelling is only allowed with the HP in its travel condition. Consequently this document does not apply to HP's with the following classification according to EN 280:2001, 1.4: - group A - type 1; - group A - type 2; - group A - type 3; - group B - type 2; - group B - type 3. This document is intended to be used in conjunction with EN 1846 2 and EN 1846 3. This document deals with the technical safety requirements to minimise the hazards listed in Clause 4 which can arise during the commissioning, the operational use, the routine checking and maintenance of hydraulic platforms when carried out in accordance with the specifications given by the manufacturer or his authorised representative. This document deals with all significant hazards, hazardous situations and events relevant to HP's, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer and taking account of their whole lifecycle (see Clause 4). NOTE 2 The lifecycle includes construction, transport, assembly and installation, commissioning, use (including setting, teaching/programming or process changeover), operation, (.)