现行

GOST 1759.0-1987

Болты, винты, шпильки и гайки. Технические условия
螺栓 螺丝 螺柱和螺母 规格

现行

BS ISO 8992-2005

Fasteners. General requirements for bolts, screws, studs and nuts
紧固件 螺栓、螺钉、螺柱和螺母的一般要求

2005-04-27

现行

KS B ISO 8992(2020 Confirm)

파스너－볼트, 스크루, 스터드 및 너트에 대한 일반 요구 사항
紧固件螺栓、螺钉、螺柱和螺母的一般要求

2005-12-20

现行

GB/T 16938-2008

紧固件 螺栓、螺钉、螺柱和螺母 通用技术条件
Fasteners - General requirements for bolts,screws,studs and nuts

2008-08-25

现行

GOST ISO 8992-2015

Изделия крепежные. Общие требования для болтов, винтов, шпилек и гаек
紧固件 螺栓 螺钉 螺柱和螺母的一般要求

2015-09-29

现行

ISO 8992-2005

Fasteners — General requirements for bolts, screws, studs and nuts
紧固件——螺栓、螺钉、螺柱和螺母的一般要求

2005-04-15

现行

BS 2693-1-1956

Specification for screwed studs-General purpose studs
螺纹螺柱规范 通用螺柱

1956-01-30

现行

KS B 1065(2020 Confirm)

수나사 부품－호칭 길이 및볼트의 나사부 길이
螺栓 螺钉和螺柱-公称长度andthread一般用途螺栓长度

2015-12-31

现行

JIS B 1009-1991

Bolts, screws and studs -- Nominal lengths, and thread lengths for general purpose bolts
螺栓、螺钉和螺柱通用螺栓的公称长度和螺纹长度

1991-01-01

现行

BS EN 26157-1-1992

Fasteners. Surface discontinuities. Bolts, screws and studs for general requirements
紧固件 表面不连续 一般要求用螺栓、螺钉和螺柱

1992-05-01

现行

GB/T 5779.1-2000

紧固件表面缺陷 螺栓、螺钉和螺柱 一般要求
Fasteners--Surface discontinuities--Bolts，screws and studs for general requirements

2000-09-26

现行

ASTM F468M-06(2018)

Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
通用六角带帽螺钉和螺柱用有色金属螺栓的标准规范（米制）

2018-09-01

现行

ASME B18.2.8-1999(R2017)

Clearance Holes for Bolts, Screws, and Studs
螺栓、螺钉和螺柱的间隙孔

1999-01-01

现行

ASTM F468-23

Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
一般用途有色金属螺栓、六角螺钉、内六角螺钉和双头螺栓的标准规范

2023-06-01

现行

ISO 262-2023

ISO general purpose metric screw threads — Selected sizes for bolts, screws, studs and nuts
ISO通用公制螺纹-螺栓、螺钉、螺柱和螺母的选定尺寸

2023-04-20

现行

SAE USCAR8-4

GRAIN FLOW PATTERN FOR BOLTS, SCREWS, AND STUDS
螺栓和螺钉的颗粒流动模式

2019-03-14

现行

SAE USCAR8-2

Grain Flow Pattern for Bolts, Screws, and Studs
螺栓、螺钉和螺柱的颗粒流动模式

2007-03-13

现行

UNE 17077-1980

SCREWS, BOLTS AND STUDS. THREAD RUN OUT.
螺钉、螺栓和螺柱 线用完了

1980-12-15

现行

SAE AS3063C

Bolts, Screws, and Studs, Geometric Control Requirements
螺栓、螺钉和螺柱 几何控制要求

2019-02-26

现行

GB/T 3098.1-2010

紧固件机械性能 螺栓、螺钉和螺柱
Mechanical properties of fasteners - Bolts,screws and studs

2011-01-10