SAE ARP6207描述了:a.根据AMS1424测试实验I型流体的准备步骤；b、 根据ARP5945，耐久时间试验样品制备的建议；c、 推荐现场喷洒试验的简短说明；d、 证明I型液体可与FAA和加拿大交通部发布的I型滞留时间指南一起使用的协议，包括从ARP5945获得的耐久时间数据；e、 美国联邦航空管理局（FAA）和加拿大交通部（Transport Canada）流体清单中包含I类流体的协议；f、 更新FAA和加拿大运输部液体清单的协议；g、 SAE g-12飞机除冰液委员会的作用；h、 SAE G-12延期委员会的作用；安迪。发布I类滞留时间指南的流程。 本文件不描述实验室测试程序。本文件不包括AMS1428 II、III和IV类液体的鉴定要求（这些要求在 ARP5718）。

SAE ARP6207 describes:a. the preparatory steps to test experimental Type I fluids according to AMS1424;b. the recommendations for the preparation of samples for endurance time testing according to ARP5945;c. a short description of the recommended field spray test;d. the protocol to demonstrate that Type I fluid can be used with the Type I holdover time guidelines published by the FAA and Transport Canada, including endurance time data obtained from ARP5945;e. the protocol for inclusion of Type I fluids on the FAA and Transport Canada lists of fluids;f. the protocol for updating the FAA and Transport Canada lists of fluids;g. the role of the SAE G-12 Aircraft Deicing Fluids Committee;h. the role of the SAE G-12 Holdover Time Committee; andi. the process for the publication of Type I holdover time guidelines.This document does not describe laboratory-testing procedures.This document does not include the qualification requirements for AMS1428 Type II, III, and IV fluids (these are provided in ARP5718).