IEC 61400-50-3:20 22描述了确保使用机舱安装的测风激光雷达进行风测量并根据最佳实践一致地进行和报告的程序和方法。本文件没有规定风力测量的目的或用例。然而，由于本文件构成IEC 61400系列标准的一部分，预计风力测量将用于某种形式的风能测试或资源评估。 本文件的范围仅限于前视机舱安装的风力激光雷达（即测量体积位于涡轮机转子的上游）。 本文件旨在描述使用机舱安装的风力激光雷达进行的风力测量，其质量足以满足功率性能测试的用例（根据IEC 61400？12？1:20 17）。

IEC 61400-50-3:2022 describes procedures and methods that ensure that wind measurements using nacelle-mounted wind lidars are carried out and reported consistently and according to best practice. This document does not prescribe the purpose or use case of the wind measurements. However, as this document forms part of the IEC 61400 series of standards, it is anticipated that the wind measurements will be used in relation to some form of wind energy test or resource assessment.
The scope of this document is limited to forward-looking nacelle-mounted wind lidars (i.e. the measurement volume is located upstream of the turbine rotor).
This document aims to describe wind measurements using nacelle-mounted wind lidar with sufficient quality for the use case of power performance testing (according to IEC 61400？12？1:2017).