首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 CSA B44.8:21/ASME-A17.8-2021
到馆提醒
收藏跟踪
购买正版
Standard for wind turbine tower elevators 风力涡轮机塔式升降机标准
发布日期: 2021-12-01
前言这是ASME A17的第二版。8/CSA B44。8,风力涡轮机塔式电梯标准。它取代了2016年出版的前一版。最初,风力涡轮机塔式电梯包含在ASME A17中。1-2013/CSA B44-13,第5.11节,2013年10月出版。本标准取代这些要求。这是一个完全协调的两国标准。本标准由CSA机械工业设备安全战略指导委员会管辖下的CSA电梯安全规范技术委员会编制,供加拿大使用,并已由CSA技术委员会正式批准。本标准的制定符合加拿大标准委员会对加拿大国家标准的要求。 CSA集团已将其作为加拿大国家标准发布。范围ASME A17。8/CSA B44。8适用于永久安装在风力涡轮机塔架上的电梯,仅用于垂直运输授权人员及其工具和设备。此类电梯通常会受到极端温度、湿度变化和大量水平运动的影响,由于其使用有限和所服务结构的构造类型,因此完全符合ASME A17的要求。1/CSA B44第2部分不可行或不必要。1.1.1生效日期本版本和后续标准补遗的要求自本文件版权页注明的日期起生效。 有管辖权的当局将确定其地方法规的生效日期。
PrefaceThis is the second edition of ASME A17.8/CSA B44.8, Standard for wind turbine tower elevators. It supersedes the previous edition published in 2016. Originally, wind turbine tower elevators were covered in ASME A17.1-2013/CSA B44-13, Section 5.11, published in October 2013. This Standard supersedes those requirements. This is a fully harmonized binational Standard. This Standard was prepared for use in Canada by the CSA Technical Committee on the Elevator Safety Code under the jurisdiction of the CSA Strategic Steering Committee on Mechanical Industrial Equipment Safety, and has been formally approved by the CSA Technical Committee. This standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.ScopeASME A17.8/CSA B44.8 applies to elevators permanently installed in a wind turbine tower to provide vertical transportation of authorized personnel and their tools and equipment only. Such elevators are typically subjected to extreme temperatures, humidity variations, and substantial horizontal motions where, by reason of their limited use and the types of construction of the structures served, full compliance with ASME A17.1/CSA B44 Part 2 is not practicable or necessary.1.1.1 Effective date The requirements of this edition and subsequent addenda to the Standard are effective as of the date noted on the copyright page of this document. The authority having jurisdiction will establish the effective date for its local regulations.
分类信息
发布单位或类别: 加拿大-加拿大标准协会
关联关系
研制信息
相似标准/计划/法规
现行
ASME A17.8/CSA B44.8-2021
Standard for Wind Turbine Tower Elevators
风力涡轮机塔架升降机标准
2022-01-28
现行
GB/T 19072-2022
风力发电机组 塔架
Wind turbines—Tower
2022-10-12
现行
NB/T 31082-2016
风电机组塔架用高强度螺栓连接副
High-strength bolting assemblies for tower on wind turbine
2016-01-07
现行
NB/T 31148-2018
风力发电机组钢制筒形塔架监造导则
Steel cylindrical tower supervision guideline for wind turbines
2018-06-06
现行
GB/T 42600-2023
风能发电系统 风力发电机组塔架和基础设计要求
Wind energy generation systems—Tower and foundation design requirements of wind turbines
2023-05-23
现行
NB/T 10216-2019
风电机组钢塔筒设计制造安装规范
Code for Design, Manufacture and Erection of Steel Tubular Tower of Wind Turbine
2019-06-04
现行
UL 6142
Standard for Safety for Small Wind Turbine Systems
小型风力涡轮机系统安全标准
2012-11-30
现行
GB/T 31295-2014
风电叶片用芯材 弯曲载荷和压缩载荷下高温尺寸稳定性的测定
The core to wind turbine blade―Determination of dimensional stability at elevated temperatures with flexural load and with compressive load
2014-12-05
现行
GB/T 32352-2015
高原用风力发电机组现场验收规范
Standard of acceptance for wind turbine generator systems used on plateau
2015-12-31
现行
IEEE 2400-2016
IEEE Standard for Wind Turbine Aero Acoustic Noise Measurement Techniques
IEEE风力涡轮机空气声噪声测量技术标准
2016-07-01
现行
IEEE 1834-2019
IEEE Standard for Technology Supervision Code for Wind Turbine Rotor Systems
IEEE风力涡轮机转子系统技术监督规范标准
2020-02-25
现行
UL Subject 6141
Standard for Wind Turbines Permitting Entry of Personnel (Bulletin, 6/9/2016)
允许人员进入的风力涡轮机标准(公告 2016年6月9日)
2016-06-09
现行
IEEE/IEC 60076-16-2018
IEC/IEEE International Standard - Power transformers - Part 16: Transformers for wind turbine applications
IEC/IEEE国际标准电力变压器第16部分:风力涡轮机用变压器
2018-09-28