现行

GB/T 5170.16-2018

环境试验设备检验方法 第16部分：稳态加速度试验用离心机
Inspection methods for environmental testing equipments—Part 16：Centrifugal machines for constant acceleration test

2018-12-28

现行

SJ 20115.8-1992

机载雷达环境条件及试验方法 恒加速度试验
Environmental conditions and test methods for aircraft radar--Constant acceleration test

1992-11-19

现行

GB/T 2689.1-1981

恒定应力寿命试验和加速寿命试验方法 总则
Constant stress life tests and acceleration life tests--General rules

1981-06-22

现行

BS EN 3841-508-2004

Aerospace series. Circuit breakers. Test methods-Centrifugal acceleration
航空航天系列 断路器 测试方法

2005-02-22

现行

JC/T 1065-2007

定速式摩擦试验机
Constant speed friction test machine

2007-09-22

现行

JJG 1025-2007

恒定加力速度建筑材料试验机
Building Material Testing Machine of Constant Loading Speed

2007-06-14

现行

BS 5214-2-1978

Specification for testing machines for rubbers and plastics-Constant rate of force application machines
橡胶和塑料试验机规范 恒速施力机

1978-09-30

现行

JIS G 0597-2017

Accelerated cyclic corrosion tests with dry and wet conditions at constant absolute humidity for stainless steels
不锈钢在恒定绝对湿度下干湿条件下的加速循环腐蚀试验

2017-01-01

现行

DIN EN 3841-508

Aerospace series - Circuit breakers - Test methods - Part 508: Centrifugal acceleration; German and English version EN 3841-508:2004
航空航天系列断路器试验方法第508部分:离心加速度；德语和英语版本EN 3841-508:2004

2005-09-01

现行

GB/T 17200-2008

橡胶塑料拉力、压力和弯曲试验机（恒速驱动） 技术规范
Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of rtaverse)

2008-06-20

现行

ASTM D4964-96(2020)

Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
弹性织物拉伸伸长率的常规试验方法（定伸伸型拉伸试验机）

2020-07-01

现行

BS 4029-1978

Method of test for the determination of tensile elastic recovery of single fibres and filaments (constant-rate-of-extension machines)
测定单纤维和长丝拉伸弹性回复的试验方法（恒速拉伸机）

1978-09-30

现行

GOST R 51805-2001

Методы испытаний на стойкость к механическим внешним воздействующим факторам машин, приборов и других технических изделий. Испытания на воздействие линейного ускорения
机械 仪器仪表等工业产品的机械环境稳定性试验方法 加速稳态影响试验

现行

ASTM D2261-13(2024)

Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
用舌（单次撕裂）法测定织物撕裂强度的标准试验方法（恒定拉伸速率拉伸试验机）

2024-01-01

现行

BS ISO 16539-2013

Corrosion of metals and alloys. Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process. "Dry" and "wet" conditions at constant absolute humidity
金属和合金的腐蚀 暴露于合成海水盐沉积过程中的加速循环腐蚀试验 恒定绝对湿度下的“干”和“湿”条件

2013-02-28

现行

GB/T 38269-2019

金属和合金的腐蚀 含人造海水沉积盐过程的循环加速腐蚀试验 恒定绝对湿度下干燥/湿润
Corrosion of metals and alloys—Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity

2019-12-10

现行

ISO 16539-2013

Corrosion of metals and alloys — Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process — "Dry" and "wet" conditions at constant absolute humidity
金属和合金的腐蚀——暴露于合成海水盐沉积过程中的加速循环腐蚀试验&mdash恒定绝对湿度下的“干”和“湿”条件

2013-02-14

现行

JB/T 7785-2007

低压电机绝缘结构寿命快速试验评定方法（步进应力法）
Evaluation method of insulation system's life by acceleration test for low-voltage electrical machines (Step stress method)

2007-05-29

现行

ASTM D7030-04(2022)

Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
使用压缩试验机在恒定载荷下瓦楞纤维板容器短期蠕变性能的标准试验方法

2022-05-01

现行

ASTM F526-21

Standard Test Method for Using Calorimeters for Total Dose Measurements in Pulsed Linear Accelerator or Flash X-ray Machines
脉冲直线加速器或闪光X射线机中总剂量测量用量热计的标准试验方法

2021-06-01