光纤复合低压电缆和附件施工及验收规范
Code for construction and acceptance of optical fiber composite low-voltage cable and accessories

2019-11-04

额定电压1kV（Um=1.2kV）及以下光纤复合低压电缆
Optical fiber composite low-voltage cable for rated voltages up to and including 1kV(Um=1.2kV)

2013-11-12

光缆接头盒 第二部分：光纤复合架空地线接头盒
Closure for optical fibre cables Part 2:Closure for optical fiber composite overhead ground wires

2005-05-11

光缆 第4-1部分:分规范 光纤复合架空地线
Optical fiber cables--Part 4-1:Section specification--Optical fibre composite overhead ground wire

2003-11-24

Слаботочные системы. Кабельные системы. Кабельные системы на основе витой пары и оптоволокна. Общие требования
低压系统 电缆系统 双绞线和光纤布线系统 一般要求

在火焰条件下电缆或光缆的线路完整性试验 第3部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法
Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure

2021-05-21

在火焰条件下电缆或光缆的线路完整性试验 第2部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法
Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not exceeding 20 mm

2021-05-21

在火焰条件下电缆或光缆的线路完整性试验 第1部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法
Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 1: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter exceeding 20 mm

2021-05-21