ISO 18594:2007-电阻点焊、凸焊和缝焊——铝和钢材料过渡电阻的测定方法 -国家数字标准馆

现行 ISO 18594:2007

到馆阅读

收藏跟踪

购买正版

Resistance spot-, projection- and seam-welding — Method for determining the transition resistance on aluminium and steel material 电阻点焊、凸焊和缝焊——铝和钢材料过渡电阻的测定方法

发布日期： 2007-02-13

ISO 18594:2007规定了测定单张或两张重叠的铝或钢薄板的过渡电阻的程序和实验装置，无论是否进行表面处理，以及是否进行表面涂层。

ISO 18594:2007 specifies the procedure and the experimental set-up for determining the transition resistance of a single sheet or two overlapping sheets of aluminium or steel, with or without surface treatment, and with or without surface coating.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 25.160.10焊接、钎焊和低温焊 - 焊接工艺

关联关系

研制信息

归口单位： ISO/TC 44/SC 6

相似标准/计划/法规

BS EN ISO 17677-1-2021

Resistance welding. Vocabulary-Spot, projection and seam welding
电阻焊词汇

Nadcap Requirements for Resistance Welding (Spot, Seam, Projection)
Nadcap对电阻焊（点焊、缝焊、凸焊）的要求

GB/T 39166-2020

电阻点焊、凸焊及缝焊接头的机械剥离试验方法
Test method of mechanized peel for resistance spot, projection and seam welds

ISO 17677-1-2021

Resistance welding — Vocabulary — Part 1: Spot, projection and seam welding
电阻焊 - 词汇 - 第1部分:点焊投影和接缝焊接

저항 용접 — 저항 점용접, 프로젝션,심용접의 용접성 로브 결정 절차
电阻焊.电阻点焊凸焊和缝焊可焊性凸角的测定程序

BS EN ISO 14327-2004

Resistance welding. Procedures for determining the weldability lobe for resistance spot, projection and seam welding
电阻焊电阻点焊、凸焊和缝焊可焊性的测定程序

GB/T 39082-2020

电阻点焊、凸焊及缝焊接头的维氏硬度试验方法
Test method of vickers hardness testing for resistance spot,projection and seam welds

KS C ISO 18594(2017 Confirm)

저항 점－, 프로젝션－, 심 용접－알루미늄과 강재의 천이저항 측정 방법
电阻点焊、凸焊和缝焊—测定铝和钢材料过渡电阻的方法

저항 점-, 프로젝션-, 심 용접 — 알루미늄과 강재의 천이저항 측정 방법
电阻点焊、凸焊和缝焊.铝和钢材料过渡电阻的测定方法

BS EN ISO 18594-2007

Resistance spot-, projection- and seam-welding. Method for determining the transition resistance on aluminium and steel material
电阻点焊、凸焊和缝焊铝和钢材料过渡电阻的测定方法

BS EN ISO 14329-2003

Resistance welding. Destructive tests of welds. Failure types and geometric measurements for resistance spot, seam and projection welds
电阻焊焊缝的破坏性试验电阻点焊、缝焊和凸焊的故障类型和几何测量

KS B ISO 14271(2024 Confirm)

저항 용접 — 저항 점 용접부, 프로젝션 용접부 및 심 용접부의 비커스 경도 시험(저하중, 미세경도)
电阻焊——电阻点焊、凸焊和缝焊的维氏硬度试验（低力和显微硬度）

저항 용접 — 저항 점 용접부, 프로젝션 용접부 및 심 용접부의 비커스 경도 시험(저하중, 미세경도)
电阻焊.凸焊和缝焊电阻点焊的维氏硬度试验（低力和显微硬度）

Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
电阻焊.凸焊和缝焊电阻点焊的维氏硬度试验（低力和显微硬度）

BS EN ISO 14271-2017

Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
电阻焊电阻点焊、凸焊和缝焊的维氏硬度试验（低力和显微硬度）

JIS Z 3139-2009

Methods of macro testing and Vickers hardness testing for section of resistance spot, projection and seam welds
电阻点焊、凸焊和缝焊截面的宏观试验和维氏硬度试验方法

UNE-EN ISO 14327-2005

Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding (ISO 14327:2004)
电阻焊.电阻点焊、凸焊和缝焊可焊性的测定程序（ISO 14327-2004）

BS 05/30114431 DC

ISO 18594. Resistance spot-, projection- and seam-welding. Method for determining the transition resistance on aluminium and steel material
ISO 18594 电阻点焊、凸焊和缝焊铝和钢材料过渡电阻的测定方法

UNE-EN ISO 17677-1-2010

Resistance welding - Vocabulary - Part 1: Spot, projection and seam welding (ISO 17677-1:2009)
电阻焊.词汇.第1部分:点焊凸焊和缝焊（ISO 17677-1-2009）

DIN EN ISO 18594

Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material (ISO 18594:2007)
电阻点焊、凸焊和缝焊.铝和钢材料过渡电阻的测定方法（ISO 18594-2007）；德文版EN ISO 18594:2007

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统