ISO 9330-2:1997-压力用焊接钢管——技术交付条件第2部分:具有规定高温性能的电阻和感应焊接非合金和合金钢管 -国家数字标准馆

现行 ISO 9330-2:1997

到馆阅读

收藏跟踪

购买正版

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties 压力用焊接钢管——技术交付条件第2部分:具有规定高温性能的电阻和感应焊接非合金和合金钢管

发布日期： 1997-02-27

规定了壁厚不超过16mm、由具有规定高温性能的非合金和合金钢制成的圆形截面电阻焊和感应焊钢管的交货技术条件。这些管道用于蒸汽发生设备的建造和互连管道工程。ISO 2604-3:1975的部分修订。

Specifies the technical delivery conditions for electric resistance and induction welded tubes of circular cross-section having a wall thickness up to and including 16 mm, made of unalloyed and alloyed steels with specified elevated temperature properties. These pipes are intended for the construction of steam generating equipment and for interconnecting pipework. Partial revision of ISO 2604-3:1975.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 23.040.10管道部件和管道 - 铁管和钢管、 77.140.75钢铁产品 - 特殊用管钢

关联关系

研制信息

归口单位： ISO/TC 17/SC 19

相似标准/计划/法规

UNE-EN 10217-7-2006

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
承压焊接钢管交货技术条件第7部分:不锈钢管

ISO 9330-6-1997

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes
压力用焊接钢管——技术交付条件第6部分:纵向焊接奥氏体不锈钢管

UNE-EN 10217-3-2003

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes.
承压焊接钢管.交货技术条件.第3部分:合金细晶粒钢管

BS EN 10216-5-2021

Seamless steel tubes for pressure purposes. Technical delivery conditions-Stainless steel tubes
压力用无缝钢管交货技术条件

ISO 9330-1-1990

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel tubes with specified room temperature properties
压力用焊接钢管——技术交付条件第1部分:具有规定室温性能的非合金钢管

BS EN 10217-1-2019

Welded steel tubes for pressure purposes. Technical delivery conditions-Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
压力用焊接钢管交货技术条件

General purpose welded circular stainless steel tubes - Technical delivery conditions
一般质量要求的焊接圆形不锈钢管.交货技术条件

UNE-EN 10217-4-2003

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties.
承压焊接钢管.交货技术条件.第4部分:具有规定低温性能的电焊非合金钢管

UNE-EN 10216-5-2006

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
压力用无缝钢管.交货技术条件.第5部分:不锈钢管

UNE-EN 10217-1-2003

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room termperature properties.
承压焊接钢管.交货技术条件.第1部分:具有规定室温特性的非合金钢管

ISO 9330-4-2000

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties
压力用焊接钢管——技术交付条件第4部分:具有规定高温性能的埋弧焊非合金和合金钢管

ISO 9330-5-2000

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties
压力用焊接钢管——技术交付条件第5部分:规定低温性能的埋弧焊非合金和合金钢管

UNE-EN 10217-2-2003

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperatured propierties.
承压焊接钢管.交货技术条件.第2部分:规定高温性能的电焊非合金和合金钢管

UNE-EN 10217-5-2003

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded no-alloy and alloy steel tubes with specified elevated temperatured properties.
承压焊接钢管.交货技术条件.第5部分:规定高温性能的埋弧焊非合金和合金钢管

UNE-EN 10217-6-2003

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties.
承压焊接钢管.交货技术条件.第6部分:规定低温性能的埋弧焊非合金钢管

BS 09/30207508 DC

BS EN 10217-3. Welded steel tubes for pressure purposes. Technical delivery conditions. Part 3. Alloy fine grain steel tubes
英国标准EN 10217-3 压力用焊接钢管技术交付条件第三部分合金细晶粒钢管

ISO 9330-3-1997

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
压力用焊接钢管——技术交付条件第3部分:具有规定低温性能的电阻和感应焊接非合金和合金钢管

BS EN 10296-2-2005

Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions-Stainless steel
机械和一般工程用焊接圆钢管交货技术条件

UNE-EN 10216-3-2003

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes.
压力用无缝钢管.交货技术条件.第3部分:合金细晶粒钢管

ISO 9329-4-1997

Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels
压力用无缝钢管——技术交付条件第4部分:奥氏体不锈钢

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统