1.1 本试验方法包括在规定的制备、调节和测试条件下，通过使用棒形和杆状对接试样测定粘合剂的相对抗拉强度。本试验方法适用于以类似或不同组合使用各种粘附材料的粘合剂的试验。 注1: 测定粘合剂抗拉强度的另一种试验方法是试验方法 D897 . 1.2 以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 ====意义和用途====== 4.1 拉伸试验提供了有关粘合剂拉伸强度的合理准确信息。 抗拉强度数据可能适用于规范验收、服务评估、制造控制、研究和开发。对于在加载速率、方向和类型上与试验不同的应用，拉伸试验并不重要。

1.1 This test method covers the determination of the relative tensile strength of adhesives by the use of bar- and rod-shaped butt-joined specimens under defined conditions of preparation, conditioning, and testing. This test method is applicable to the testing of adhesives with various adherend materials in either similar or dissimilar combinations. Note 1: An alternative test method for determining the tensile strength of adhesives is Test Method D897 . 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== 4.1 Tension tests provide reasonably accurate information with regard to the tensile strength of adhesives. Tensile strength data may be suitable for specification acceptance, service evaluation, manufacturing control, research, and development. Tension tests are not considered significant for applications differing from the test in rate, direction, and type of loading.