ISO/IEC 14763-2:2019规定了电信布线和布线基础设施的规划、安装和运行要求，包括支持综合布线标准和相关文件的布线、路径、空间和电信连接（ISO/IEC 30129规定的除外）。主要涉及以下几个方面: a） 安装规范； b） 质量保证； c） 安装规划； d） 安装实践； e） 文件； f） 管理； g） 测试； h） 检查； i） 操作； j） 维护； k） 修理。 第5至14条的要求和建议是独立的。附件C至G包含对这些要求和建议的特定场所修正和增补。 此外，本文件描述了为支持远程供电目标而对空间、通道、通道系统和布线（已安装或计划）进行评估的方法。 本文件不包括适用于其他布线系统（如电源布线）的具体要求；然而，它考虑了其他布线系统可能对电信布线安装的影响（反之亦然），并给出了一般建议。 本文件不包括与发射机、接收机或其相关天线系统（如无线、无线电、微波或卫星）之间的自由空间信号传输相关的安装方面。 本文件适用于某些危险环境，但不排除适用于特殊情况（如供电和电气化铁路）的附加要求。 安全和电磁兼容性（EMC）要求不在本文件的范围内，并包含在其他标准和法规中。 然而，本文件中提供的信息有助于满足这些标准和法规。 与前一版相比，第二版包括以下重大技术变化:纳入规划和安装实践，以支持电信布线基础设施的远程供电，以及纳入建筑物外的规划和安装实践。

ISO/IEC 14763-2:2019 specifies requirements for the planning, installation and operation of telecommunications cabling and cabling infrastructures including cabling, pathways, spaces and telecommunications bonds (other than that specified in ISO/IEC 30129) in support of generic cabling standards and associated documents. The following aspects are addressed: a) specification of the installation; b) quality assurance; c) installation planning; d) installation practice; e) documentation; f) administration; g) testing; h) inspection; i) operation; j) maintenance; k) repair. The requirements and recommendations of Clauses 5 to 14 are premises-independent. Annexes C through G contain premises-specific amendments of and additions to these requirements and recommendations. In addition, this document describes the methodology for the assessment of spaces, pathways, pathway systems and cabling (either installed or planned) in support of remote powering objectives. This document excludes specific requirements applicable to other cabling systems (e.g. power supply cabling); however, it takes account of the effects other cabling systems may have on the installation of telecommunications cabling (and vice versa) and gives general advice. This document excludes those aspects of installation associated with the transmission of signals in free space between transmitters, receivers or their associated antenna systems (e.g. wireless, radio, microwave or satellite). This document is applicable to certain hazardous environments but does not exclude additional requirements which are applicable in particular circumstances (e.g. electricity supply and electrified railways). Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this document and are covered by other standards and regulations. However, information given in this document can be of assistance in meeting these standards and regulations. This second edition includes the following significant technical changes with respect to the previous edition: the inclusion of planning and installation practices to support remote powering over the telecommunications cabling infrastructure and the inclusion of planning and installation practices outside buildings.