家用和类似用途的自动电气控制装置；第2部分:自动电气气流、水流和水位传感控制的特殊要求SUL 60730-2-151范围和规范性参考本第1部分的条款替换如下:1.1 IEC 60730的本部分适用于用于或与之相关的自动电气气流、水流和水位传感控制，最大额定压力为2000 kPA（20 bar）的锅炉，以及一般家用和类似用途的设备，包括加热、空调和类似应用的控制装置。例如，锅炉应用中使用的浮子或电极传感器类型的水流和水位感应控制装置，以及游泳池泵、水箱泵、冷却塔、洗碗机、洗衣机、空调冷却器和通风应用中的气流、水流和水位感应控制装置。1.1.1本标准适用于固有安全、与设备保护相关的操作值、操作顺序，以及家用和类似设备中使用的或与之相关的自动电气气流、水流和水位传感控制的测试。 本标准也适用于IEC 60335-1和IEC 60364-7-702范围内的电器控制。非正常家用设备的自动电气空气流量、水流和水位感应控制装置，但可能供公众使用，如商店、轻工业和农场的非专业人员使用的设备，均在本标准的范围内。本标准也适用于作为控制系统一部分使用的单个控制装置，或与具有非电气输出的多功能控制装置机械集成的控制装置。本标准不适用于IEC 60730-2-6中规定的压力驱动空气流量、水流和水位传感控制装置。IEC 60730-2-6，家用和类似用途的自动电气控制-第2-6部分:自动电气压力传感控制的特殊要求，包括机械要求本标准不适用于专门为工业应用设计的气流、水流和水位传感控制。 在本标准中，“设备”一词是指“器具和设备”。1.1.1DV对1.1.1第六段进行修改，添加以下内容:本标准也适用于商业和工业应用中使用的空气流量、水流和水位传感控制装置，目前没有其他标准涵盖该产品。1.1.2本标准适用于机械或电动自动电气控制装置，对气流、水流和水位进行响应或控制。1.1.3本标准包含气流、水流和水位传感控制装置的电气特性要求，以及可能影响其预期操作和电气安全的机械特性要求。1.1.4本标准适用于与气流、水流和水位传感控制装置电气和/或机械集成的手动控制装置。IEC 60669和IEC 61058中包含了不构成自动控制一部分的手动开关的要求- 1.1.1.5通常情况下，这些气流、水流和水位传感控制装置与设备集成或结合在一起，或计划集成或结合在设备中或设备上。本标准还涵盖了独立安装或采用直列跳线结构的控制装置。1.2本标准适用于额定电压不超过690 V、额定电流不超过63 a.1.2 V的控制装置。通过添加以下文字修改1.2:最大电压为600 V。最大电流不受限制。1.3本标准考虑了控制装置自动动作的响应值，该响应值取决于安装控制装置的方法。如果响应值对保护用户或周围环境具有重要意义，则应适用适当家用设备标准中定义的值或制造商确定的值。1.4本标准也适用于包含电子设备的控制装置，其要求包含在附录h中。 本标准也适用于使用NTC和PTC热敏电阻的控制装置，其要求见附录J。 1.5规范性参考第1部分的本子条款适用，但以下情况除外:补充:1.5 IEC 60364-7-702，建筑物电气安装-第7部分:特殊装置或位置的要求-第702节:游泳池和其他基础IEC 60669（所有部分），家用和类似固定电气装置的开关

Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Air Flow, Water Flow and Water Level Sensing ControlsUL 60730-2-151 Scope and normative referencesThis clause of part 1 is replaced as follows:1.1 This part of IEC 60730 applies to automatic electrical air flow, water flow and water level sensing controls for use in, or in association with, boilers with a maximum pressure rating of 2 000 kPA (20 bar) and equipment for general household and similar use including controls for heating, air-conditioning and similar applications.Examples are water flow and water level sensing controls of the float or electrode-sensor type used in boiler applications and air flow, water flow and water level sensing controls for swimming pool pumps, water tank pumps, cooling towers, dishwashers, washing machines, air conditioning chillers and ventilation applications.1.1.1 This standard applies to the inherent safety, to the operating values, operating sequences where such are associated with equipment protection, and to the testing of automatic electrical air flow, water flow and water level sensing controls used in, or in association with, household and similar equipment.This standard is also applicable to controls for appliances within the scope of IEC 60335-1 and IEC 60364-7-702.Automatic electrical air flow, water flow and water level sensing controls for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.This standard is also applicable to individual controls utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non-electrical outputs.This standard is not applicable to pressure-operated air flow, water flow and water level sensing controls, requirements for which are contained in IEC 60730-2-6.IEC 60730-2-6, Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirementsThis standard does not apply to air flow, water flow and water level sensing controls designed exclusively for industrial applications.Throughout this standard, the word "equipment" means "appliance and equipment".1.1.1DV Modification of the sixth paragraph of 1.1.1 by adding the following text:This standard also applies to air flow, water flow and water level sensing controls used in commercial and industrial applications where no other standard currently covers the product.1.1.2 This standard applies to automatic electrical controls, mechanically or electrically operated, responsive to or controlling air flow, water flow and water level.1.1.3 This standard contains requirements for electrical features of air flow, water flow and water level sensing controls and requirements for mechanical features that may affect their intended operation and electrical safety.1.1.4 This standard applies to manual controls when such are electrically and/or mechanically integral with air flow, water flow and water level sensing controls.Requirements for manual switches not forming part of an automatic control are contained in IEC 60669 and IEC 61058-1.1.1.5 In general, these air flow, water flow and water level sensing controls are integrated or incorporated with the equipment or are intended to be integrated or incorporated in or on the equipment. This standard also covers controls when they are independently mounted or of inline cord construction.1.2 This standard applies to controls with a rated voltage not exceeding 690 V and a rated current not exceeding 63 A.1.2DV Modification of 1.2 by adding the following text:The maximum voltage is 600 V. The maximum current is unlimited.1.3 This standard takes into account the response value of an automatic action of a control where such a response value is dependent upon the method of mounting the control. Where a response value is of significant purpose for the protection of the user, or surroundings, the value defined in the appropriate household equipment standard or as determined by the manufacturer shall apply.1.4 This standard applies also to controls incorporating electronic devices, requirements for which are contained in Annex h.This standard applies also to controls using NTC and PTC thermistors, requirements for which are contained in Annex J. 1.5 Normative referencesThis subclause of Part 1 is applicable except as follows: Addition: 1.5 IEC 60364-7-702, Electrical installation of buildings - Part 7: Requirements for special installations or locations - Section 702: Swimming pools and other basinsIEC 60669 (all parts), Switches for household and similar fixed-electrical installations