现行

KS B ISO 15996(2023 Confirm)

가스 실린더 — 잔류 압력 밸브 — 잔류 압력 장치를 포함하는 실린더 밸브의 제원및 형식 시험
气瓶.残余压力阀.装有残余压力装置的气瓶阀的规范和型式试验

2018-12-13

现行

KS B ISO 15996

가스 실린더 — 잔류 압력 밸브 — 잔류 압력 장치를 포함하는 실린더 밸브의 제원및 형식 시험
气瓶 - 残压阀 - 包含残压装置的气缸阀的规格和型式试验

2018-12-13

现行

ISO 15996-2017

Gas cylinders — Residual pressure valves — Specification and type testing of cylinder valves incorporating residual pressure devices
气瓶 - 残压阀 - 包含残压装置的气缸阀的规格和型式试验

2017-08-08

现行

BS EN ISO 15996-2017

Gas cylinders. Residual pressure valves. Specification and type testing of cylinder valves incorporating residual pressure devices
气瓶 余压阀 装有残余压力装置的钢瓶阀门的规范和型式试验

2017-09-27

现行

ISO 22435-2024

Gas cylinders — Cylinder valves with integrated pressure regulators — Specification and type testing
气瓶.带集成压力调节器的气瓶阀.规范和型式试验

2024-03-21

现行

BS EN ISO 22435-2007+A1-2012

Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
气瓶 带有集成压力调节器的气缸阀 规范和型式试验

2013-03-31

现行

ISO 12209-2013/Amd 1-2016

Gas cylinders — Outlet connections for gas cylinder valves for compressed breathable air — Amendment 1: Outlet connection up to a maximum cylinder working pressure of 500 bar
最大气缸工作压力为500巴的出口连接

2016-12-06

现行

ISO 11114-6-2022

Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing
气瓶.气瓶和阀门材料与气体含量的兼容性.第6部分:氧气压力波动试验

2022-08-17

现行

UNE-EN ISO 22435-2009

Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007)
气瓶.带集成压力调节器的气瓶阀.规范和型式试验（ISO 22435-2007）

2009-04-08

现行

KS B ISO 2503

가스 용접 장비 30 MPa 이하에서의 용접, 절단 등에 사용되는 가스 실린더용 압력 조정기
气焊设备用于焊接、切割和相关工艺的气瓶的压力调节器 压力不超过300巴

2022-12-19

现行

KS B ISO 2503(2017 Confirm)

가스 용접 장비－30 MPa 이하에서의 용접, 절단 등에 사용되는 가스 실린더용압력 조정기
气焊设备－焊接、切割及相关工艺用300巴以下气瓶的压力调节器

2007-06-29

现行

DIN 3171-2

Breathing apparatus - Compressed gas cylinders for compressed air and compressed oxygen - Part 2: Composite cylinders for 300 bar and 450 bar test pressure
呼吸器.压缩空气和压缩氧气用压缩气瓶.第2部分:300巴和450巴试验压力用复合气瓶

2000-02-01

现行

DIN 3171-1

Breathing apparatus - Compressed gas cylinders for compressed air and compressed oxygen - Part 1: Seamless steel cylinders, for 300 bar and 450 bar test pressure
呼吸器.压缩空气和压缩氧气用压缩气瓶.第1部分:300巴和450巴试验压力用无缝钢瓶

2000-02-01

现行

UNE-EN ISO 15996-2006

Gas cylinders - Residual pressure valves - General requirements and type testing (ISO 15996:2005)
气瓶.余压阀.一般要求和型式试验（ISO 15996-2005）

2006-02-08

现行

ISO 2503-2009

Gas welding equipment — Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
气焊设备——压力调节器和带有流量计量装置的压力调节器 用于300 bar（30 MPa）以下的焊接、切割和相关工艺中的气瓶

2009-07-02

现行

BS EN ISO 2503-2009+A1-2015

Gas welding equipment. Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
气焊设备 压力调节器和带有流量计量装置的压力调节器 用于300巴（30兆帕）以下的焊接、切割和相关工艺中的气瓶

2015-05-31

现行

ISO 2503-2009/Amd 1-2015

Gas welding equipment — Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) — Amendment 1
气焊设备.300巴（30兆帕）以下焊接、切割和相关工艺用气瓶用压力调节器和带流量测量装置的压力调节器.修改件1

2015-04-15

现行

GOST R 54791-2011

Оборудование для газовой сварки, резки и родственных процессов. Редукторы и расходомеры для газопроводов и газовых баллонов с давлением газа до 300 бар (30 МПа)
用于焊接 切割和相关工艺的气体焊接设备 压力调节器和压力调节器 带有用于歧管系统的流量计量装置和高达300巴（30МРа）的气瓶

现行

UNE-EN ISO 2503-2010

Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (ISO 2503:2009)
气焊设备.300巴（30兆帕）以下焊接、切割和相关工艺用气瓶用压力调节器和带流量计量装置的压力调节器（ISO 2503-2009）

2010-06-23

现行

MIL MIL-DTL-2/10D

VALVE, CYLINDER, GAS: ANHYDROUS AMMONIA (CONVEX-HEAD CYLINDER), OUTLET 240, INLET 1.00 INCH (PRESSURES UP THROUGH 500 PSIG (3450KPA) AT 70 DEG. F (21.1 DEG.C)) (SUPERSEDING MIL-DTL-2/10C)
气体气瓶阀门:无水氨（凸头气瓶） 出口240 进口1.00英寸（在70华氏度（21.1摄氏度）下压力高达500磅/平方英寸（3450千帕））（取代MIL-DTL-2/10C）

2002-09-25