该欧洲标准定义了玻璃的原理以及关于部件选择的建议，例如。框架部分，珠子，排水孔等，用于将玻璃装入任何材料的框架。 该欧洲标准适用于所有类型的边缘支撑的垂直和倾斜玻璃窗系统，在建筑物中使用的所有类型的固定或开放框架。 该欧洲标准还规定了在其制造，运输，安装和使用寿命期间框架内的玻璃砖的功能，要求和安装。该标准适用于所有类型的平面或弯曲玻璃以及衍生加工类型的玻璃的玻璃块。 对于某些玻璃制品，例如防火玻璃，安全玻璃，其他或附加要求，规则或建议可能适用。 该标准适用于欧洲气候条件。 本欧洲标准不适用于以下内容: - 玻璃砖和摊铺机（EN 1051 1）; - 通道形玻璃（EN 572 7）; - 结构密封玻璃（见EN 13022 1和EN 13022 2和ETAG 002）; - 在玻璃窗中粘合玻璃; 点固定玻璃; - 温室（见EN 13031 1）。 由于本标准仅提供基本装配原则，国家要求，规则或建议

This European Standard defines principles of glazing as well as recommendations on the selection of components, e.g. frame sections, beads, drainage holes, etc., for fitting glazing into frames of any material. This European Standard applies to all basic types of edge supported vertical and sloping glazing systems, in all types of fixed or opening frames used in buildings. This European standard specifies also the functions, requirements and installation of glazing blocks within a frame during its manufacturing, transportation, installation and operational life. The standard applies to glazing blocks used for all types of flat or curved glass, as well as to derived processed types of glass. For certain glass products, e.g. fire resistant glazing, security glass, other or additional requirements, rules or recommendations may apply. The standard is applicable to European climate conditions. This European Standard does not apply to the following: - glass blocks and paver units (EN 1051 1); - channel-shaped glass (EN 572 7); - structural sealant glazing (see EN 13022 1 and EN 13022 2 and ETAG 002); - adhesively bonded glazing in window; - point fixed glazing; - greenhouses (see EN 13031 1). As this standard gives basic assembly principles only, national requirements, rules or recommendations may also apply.