Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms
带紧急逃生(出口)释放机构的窗户防坠落装置规范
发布日期:
2001-09-10
1.1本规范规定了旨在解决五岁及以下儿童从窗户意外跌落导致伤亡风险的装置的要求。
1.2本规范不旨在满足《美国残疾人法案》(ADA)的独特要求。
1.3本规范适用于任何窗户上使用的窗户防坠落装置,包括指定用于紧急逃生(出口)和救援(入口)的装置。
注1-2006年安全规范(safety specification F 2006)是一项单独的安全规范,涵盖了多户住宅楼地面以上75英尺(23米)以上装置中非紧急逃生(出口)和救援(入口)窗户的防坠落装置。
1.4
本标准无意解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管限制的适用性。
1.5以英寸-磅为单位的数值应视为标准值。括号中给出的SI值仅供参考。
1.1 This specification establishes requirements for devices intended to address the risk of injury and death associated with accidental falls from windows by children five years old and younger.
1.2 This specification is not intended to meet the unique requirements of Americans With Disabilities Act (ADA).
1.3 This specification applies to window fall prevention devices that are to be used on any windows, including those that are designated for emergency escape (egress) and rescue (ingress).
Note 1—A separate safety specification, Safety Specification F 2006, covers window fall prevention devices for non-emergency escape (egress) and rescue (ingress) windows in installations more than 75 feet (23 m) above ground level in multiple family dwelling buildings.
1.4
This standard does not purport to address all safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
1.5 The values stated in inch-pound units are to be regarded as the standard. The SI values given in parentheses are for information only.