ISO 10350系列确定了获取和呈现塑料某些基本性能的可比数据的具体测试程序。一般来说，每个特性由一个单独的试验值指定，尽管在某些情况下，特性由在不同试验条件下获得的两个值表示。所包含的特性是制造商数据表中常规显示的特性。ISO 10350-1主要适用于未增强和增强的热塑性和热固性材料，这些材料可能是注射成型或压缩成型的，或制备成规定厚度的板材。 就ISO 10350-1而言，长纤维增强塑料在成型前的纤维长度应大于7.5 mm。 注:ISO 10350-2专门涉及长纤维或连续纤维增强塑料。

The ISO 10350 series identifies specific test procedures for the acquisition and presentation of comparable data for certain basic properties of plastics. In general, each property is specified by a single experimental value, although in certain cases properties are represented by two values obtained under different test conditions. The properties included are those presented conventionally in manufacturers' data sheets. ISO 10350-1 applies predominantly to unreinforced and reinforced thermoplastic and thermosetting materials that may be injection- or compression-moulded or prepared as sheets of specified thickness. For the purposes of ISO 10350-1, long-fibre-reinforced plastics are considered to have fibre lengths greater than 7,5 mm prior to moulding. NOTE ISO 10350-2 deals specifically with long- or continuous-fibre-reinforced plastics.