1.1 本规范涵盖了圆形和异形铬硅合金钢弹簧线，其性能和质量用于制造在适度高温下使用时耐凝固的弹簧。本产品不适用于涉及中等疲劳应力的非静态应用（见规范 1000米/1000米 )或高周疲劳应用（见规范 877米/877米 ). 该钢丝应按照买方的规定，在退火和冷拔或淬火和回火状态下提供。 1.2 以国际单位制或英寸-磅单位表示的值应单独视为标准值。每个系统中所述的值可能不是完全等效的；因此，每个系统都应独立使用。将两个系统的值结合起来可能会导致不符合标准。 1.2.1 在文本中，英寸-磅单位显示在括号中。 1.3 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This specification covers round and shaped chromium-silicon alloy steel spring wire having properties and quality intended for the manufacture of springs resistant to set when used at moderately elevated temperatures. This product is not meant to be used for non-static applications involving moderate fatigue stresses (see Specification A1000/A1000M ) or high cycle fatigue applications (see Specification A877/A877M ). This wire shall be provided either in the annealed and cold-drawn or quenched and tempered condition as specified by the purchaser. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.2.1 Within the text, the inch-pound units are shown in brackets. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.