1.1 本规程制定了用于游乐场内互动游戏活动的游戏区和系统中使用的网和/或网的设计、制造和维护的性能规范和性能标准。 1.2 本安全性能规范涵盖的用户范围为32英寸。（0.81米）（2岁，第5百分位）到50英寸。（1.27米）（8岁，第50百分位），50英寸。（1.27米）（8岁，第50百分位）到64英寸。（1.62米）（12岁第95百分位），32英寸。（0.81米）（2岁，第5百分位）到64英寸。 （1.62米）（12岁，第95百分位），64英寸。（1.62米）（12岁，第95百分位）到成人。 1.3 本标准中列出的年龄旨在作为确定活动和使用的指南。高度要求是控制因素。 1.4 家庭游乐场设备、矩阵网、用作/或用于围栏的网、运动设备、健身设备、消费者安全性能规范涵盖的游乐场设备 F1487 以及安全性能规范涵盖的软式游戏设备（SCPE） F1918 F24标准未涵盖的区域不包括在本标准中。 1.5 本实践包括一个附录（非强制性），该附录提供了附加信息（例如，原理、背景、解释、图纸、注释等）提高用户对本实践中提出的标准的理解和应用。附录信息不得解释为强制性设计标准。 1.6 本标准适用于新的攀爬区域和重大修改。 1.7 只要任何重大设计相关故障或重大设计相关安全问题得到缓解，现有攀爬区域可在本规程发布之日起五年内符合要求。 此后，攀爬区域必须符合实践“服务证明”的要求 F2291 或满足本规程的要求。 1.8 以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.9 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 1.10 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This practice establishes performance specifications and performance standards for the design, manufacturing, and maintenance of netting and or mesh used in play areas and systems designed for interactive play activities within amusement attractions. 1.2 The range of users encompassed by this safety performance specification is 32 in. (0.81 m) (2 years old, 5th percentile) through 50 in. (1.27 m) (8 years old, 50th percentile), 50 in. (1.27 m) (8 years old, 50th percentile) through 64 in. (1.62 m) (12 years old 95th percentile), 32 in. (0.81 m) (2 years old, 5th percentile) through 64 in. (1.62 m) (12 years old, 95th percentile), and 64 in. (1.62 m) (12-year old, 95th percentile) through adult. 1.3 The ages listed in this standard are intended to be used as a guide for determining activities and use. The height requirements are the governing factor. 1.4 Home playground equipment, matrix nets, nets used as/or in fencing, sports equipment, fitness equipment, playground equipment covered by Consumer Safety Performance Specification F1487 and soft contained play equipment (SCPE) covered by Safety Performance Specification F1918 in areas not covered by F24 standards are not included in this standard. 1.5 This practice includes an appendix (non-mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth.) to improve the user’s understanding and application of the criteria presented in this practice. The appendix information shall not be interpreted as mandatory design criteria. 1.6 This standard is intended for new climb areas and major modifications. 1.7 Existing climb areas may qualify as compliant for five years following the date of this publication of this practice as long as any significant design related failures or significant design related safety issues have been mitigated. Thereafter, climb areas must qualify as “Service Proven” per Practice F2291 or meet the requirements of this practice. 1.8 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.