现行

CEMA 404-2000

Chain Driven Live Roller Conveyors
链传动活辊输送机

2000-01-31

现行

CEMA 404-1985

Chain Driven Live Roller Conveyors
链传动活辊输送机

1985-01-01

现行

CEMA 406-1996

Lineshaft Driven Live Roller Conveyors
线轴驱动活辊道输送机

1996-01-01

现行

KS B 6229(2020 Confirm)

벨트 컨베이어용 롤러
皮带输送机滚筒

2015-12-30

现行

JIS B 8803-2008

Rollers for belt conveyor
带式输送机辊子

2008-01-01

现行

GOST 22646-1977

Конвейеры ленточные. Ролики. Типы и основные размеры
皮带输送机 滚筒类型和基本尺寸

现行

MT/T 1063-2008

煤矿用带式输送机滚筒 技术条件
Roller for belt conveyor for coal mines-Technical specification

2008-11-19

现行

GOST R 57841-2017

Оборудование горно-шахтное. Конвейеры шахтные ленточные. Ролики. Общие технические условия
采矿设备 带式输送机滚筒 通用规范

现行

BS ISO 5293-2004

Conveyor belts. Determination of minimum transition distance on three idler rollers
传送带 三个托辊最小过渡距离的确定

2009-02-28

现行

HG/T 4603-2014

输送带 三辊托辊最小过渡距离的计算
Conveyor belts - Determination of minimum transition distance on three idler rollers

2014-05-06

现行

GB/T 39819-2021

输送带 三辊托辊最小过渡距离的确定
Conveyor belts—Determination of minimum transition distance on three idler rollers

2021-03-09

现行

ISO 5293-2004

Conveyor belts — Determination of minimum transition distance on three idler rollers
输送带——三个托辊最小过渡距离的确定

2004-09-21

现行

MIL MIL-C-52870A Notice 1-Cancellation

CONVEYOR, FLAT BELT, PORTABLE, GASOLINE-ENGINE DRIVEN (NO S/S DOCUMENT)
汽油发动机驱动的便携式平皮带输送机（无S/S文件）

1993-02-11

现行

DIN 22116

Belt conveyors for underground coal mining - Pressure rollers DN 159 - Dimensions, requirements, marking
地下煤矿用带式输送机.压力辊DN 159.尺寸、要求和标记

2003-10-01

现行

MT/T 645-1997

煤矿用带式输送机滚筒与相邻槽形托辊组之间的距离计算公式
Conveyor belts—Formula for transition distance on three equal length idler rollers—For coal mining

1997-11-10

现行

MIL MIL-C-52126D Notice 1-Cancellation

CONVEYOR, BELT, PORTABLE, WHEEL-MOUNTED, ELECTRIC-MOTOR-DRIVEN, 50 FOOT (NO S/S DOCUMENT)
便携式皮带输送机 轮式 电动 50英尺（无文件）

1994-10-04

现行

MIL MIL-C-52126D

CONVEYOR, BELT, PORTABLE, WHEEL-MOUNTED, ELECTRIC-MOTOR-DRIVEN, 50 FOOT (NO S/S DOCUMENT)
50英尺电动轮式便携式皮带输送机（无S/S文件）

1987-07-13

现行

BS 5667-14-1979

Specification for continuous mechanical handling equipment - safety requirements-Unit loads: live roller conveyors (with positive or friction drive)
连续机械装卸设备规范.安全要求 单位荷载:活辊道输送机（带正向或摩擦驱动）

1979-01-31

现行

MIL MIL-C-11085D Notice 1-Cancellation

CONVEYOR, BELT: (FLAT, SKID-MOUNTED, ELECTRIC-MOTOR-DRIVEN, 24-INCH WIDE BELT, 50-FOOR-LONG FRAME; CAPACITY, 25 POUNDS PER FOOT, 75 TONS PER HOUR) (NO S/S DOCUMENT)
皮带输送机:（平面、滑动安装、电动、24英寸宽皮带、50英尺长框架；容量 每英尺25磅 每小时75吨）（无文件）

1993-02-11

现行

MIL MIL-C-11085D

CONVEYOR, BELT: (FLAT, SKID-MOUNTED, ELECTRIC-MOTOR-DRIVEN, 24-INCH WIDE BELT, 50-FOOR-LONG FRAME; CAPACITY, 25 POUNDS PER FOOT, 75 TONS PER HOUR) (NO S/S DOCUMENT)
传送带:（扁平、撬装、电动、24英寸宽的传送带 50英尺长的框架；容量 每英尺25磅 每小时75吨）（无S/S文件）

1986-03-14