Пилы дисковые, оснащенные пластинами из сверхтвердых материалов, для обработки древесных материалов и пластиков. Общие технические условия
超硬的圆锯用于加工木材和塑料 一般规格

Elastic-Plastic Bending of a Constrained Circular Perforated Plate Under Uniform Pressure (Triangular Penetration Pattern)
受约束圆孔板在均布压力下的弹塑性弯曲（三角形穿透模式）

Plastic drums. Non-removable head (tight head) circular cross-section drums with a nominal capacity of 20 l to 120 l
塑料桶 标称容量为20 l至120 l的不可拆卸封头（紧封头）圆形横截面圆筒

2003-01-20

PLASTIC DRUMS - NON REMOVABLE HEAD (TIGH HEAD) CIRCULAR CROSS-SECTION DRUMS WITH A NOMINAL CAPACITY OF 20 L TO 120 L.
塑料桶.标称容量为20L至120L的不可拆卸封头（TIGH封头）圆形横截面桶

2001-04-30

Plastics piping systems for drainage and sewerage without pressure. Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP). Dimensions, requirements and tests
无压排水和排污用塑料管道系统 非圆形管道和接头由基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）制成 尺寸、要求和试验

2017-06-22

Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests
无压力排水和污水的塑料管道系统 - 基于不饱和聚酯树脂（UP）的玻璃增强热固性塑料（GRP）制成的非圆形管道和接头 - 尺寸 要求和试验

2017-06-15

Plastics piping systems for drainage and sewerage without pressure - Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) - Dimensions, requirements and tests (ISO 16611:2017)
无压排水和污水用塑料管道系统.基于不饱和聚酯树脂（UP）的玻璃纤维增强热固性塑料（GRP）制非圆管和接头.尺寸 要求和试验（ISO 16611-2017）

2020-01-01

Plastics drums - Non-removable head (tight head) circular cross section drums with a nominal capacity of 20 l to 120 l; English version of DIN EN 12709
塑料桶——标称容量为20 l至120 l的不可拆卸封头（紧封头）圆形横截面桶；德文版EN 12709:2000

2000-03-01