首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 EN 15947-5:2022
到馆提醒
收藏跟踪
购买正版
Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 5: Requirements for construction and performance 烟火制品 - 烟火 分类F1 F2和F3 - 第5部分:施工和性能要求
发布日期: 2022-10-05
实施日期: 2022-10-05
本文件规定了烟花、主包装和选择包装的结构和性能要求。适用于指令2013/29/EU第6条第(1)款第(a)(i)至(iii)款定义的F1、F2和F3类烟花,并在FprEN 15947-2:2021中进行了描述。 本文件不适用于含有除黑火药或闪光成分或包含以下任何物质的烟火成分以外的爆炸性炸药的烟花: -砷或砷化合物; -六氯苯; -铅或铅化合物; -氯酸盐质量分数大于80%的混合物; -氯酸盐与金属的混合物; -氯酸盐与红磷的混合物(用于圣诞饼干、派对爆竹或快照时除外); -氯酸盐与铁氰化钾(II)的混合物; -氯酸盐与硫磺的混合物(这些混合物仅允许用于摩擦头); -氯酸盐与硫化物的混合物; -汞化合物; -氮质量分数超过12.6%的硝化纤维素。 -苦味酸盐或苦味酸; -溴酸盐质量分数大于0.15%的氯酸钾; -酸度大于0002%的硫,以硫酸的质量分数表示; -白磷; -粒度小于40µm的锆。 本文件不适用于拟在以下温度下保存或使用的烟花−20°C或50°C以上。
This document specifies requirements for construction and performance of firework and primary packs and selection packs. It is applicable to firework of the categories F1, F2 and F3 as defined by Article 6 Paragraph (1) clause (a) subclause (i) to (iii) of Directive 2013/29/EU. This document is not applicable for fireworks containing detonative explosives other than black powder or flash composition or pyrotechnic composition that includes any of the following substances: - arsenic or arsenic compounds; - hexachlorobenzene; - lead or lead compounds; - mixtures containing a mass fraction of chlorates greater than 80 %; - mixtures of chlorates with metals; - mixtures of chlorates with red phosphorus (except when used in Christmas crackers, party poppers or snaps); - mixtures of chlorates with potassium hexacyanoferrate (II); - mixtures of chlorates with sulphur (these mixtures are allowed for friction heads only); - mixtures of chlorates with sulphides; - mercury compounds; - nitrocellulose with a mass fraction of nitrogen of more than 12,6 %. - picrates or picric acid; - potassium chlorate with a mass fraction of bromates greater than 0,15 %; - sulphur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %; - white phosphorus; - zirconium with a particle size of less than 40 µm. This document does not apply to fireworks intended to be kept or used at temperatures below −20 °C or above 50 °C.
分类信息
关联关系
研制信息
归口单位: CEN/TC 212
相似标准/计划/法规