本文件规定了组合式木工机械（定义见3.1）的安全要求和措施，该机器能够连续生产使用，并可手动装卸工件，以下也称为“机器”。 这些机器设计用于切割实木和具有与木材相似物理特性的材料。 它处理附录A中列出的与机器相关的所有重大危险、危险情况和事件，当按照预期和制造商预见的条件进行操作、调整和维护时；也考虑了合理可预见的滥用。 运输、组装、拆卸、禁用和报废阶段也已考虑在内。 本文件适用于配备ISO 19085 5:202x、ISO 19085 6:202x、ISO 19085-7:202x和ISO 19085-9:202x范围内所列装置/附加工作装置的机器。 本文件不适用于: a） 仅包含刨削装置和榫眼装置的机器； 注:此类机器在ISO 19085-7:202x中进行了处理。 b） 包含带锯装置的组合机器； c） 带有榫眼装置的机器，具有除刨削装置驱动之外的单独驱动装置； d） 拟在潜在爆炸性环境中使用的机器； e） 在其作为国际标准出版之日之前制造的机器。

This document specifies the safety requirements and measures for combined woodworking machines (defined in 3.1), capable of continuous production use, with manual loading and unloading of the workpiece and hereinafter referred to also as “machines”. The machines are designed to cut solid wood and material with similar physical characteristics to wood. It deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account. This document does apply to machines also equipped with the devices/additional working units listed in the Scopes of ISO 19085 5:202x, ISO 19085 6:202x, ISO 19085-7:202x and ISO 19085-9:202x. This document does not apply to: a) machines incorporating only a planing unit and a mortising device; NOTE Such machines are dealt with in ISO 19085-7:202x. b) combined machines incorporating a band saw unit; c) machines with a mortising unit with a separate drive other than the planing unit drive; d) machines intended for use in potentially explosive atmosphere; e) machines manufactured before the date of its publication as an International Standard.